Page 1
Keep product away from open flames and extreme heat. Avoid direct sunlight or heat exposure. Improper battery use may damage the product. Zi-Stick is intended for indoor use in dry locations only. Do not use it in damp, moist, and/or wet locations.
Page 2
Quick start. The following will step you through using Zi-Stick when it is attached to a host controller (PC) as a primary controller. Please make sure the host controller is pre-installed; this includes any drivers that the corresponding OS may need. In most cases, the host controller automatically installs the required USB drivers.
Page 3
(https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers) (https://www.silabs.com/developers /usb-to-uart-bridge-vcp-drivers) Current compatible software and setup guides Zi-Stick will be used with your software of choice. Below is a list of all the known software that is compatible with Zi- Stick and how to set them up. (https://help.aeotec.com/a/solutions/articles/6000246295) (https://aeotec.freshdesk.com/a/solutions/articles •...