Table of Contents
Advertisement
TIPS & ADVICE SECTION
Tips: Fuses
Your amplifier is designed to use "slow blow" type fuses. These are contained in the fuse drawer built into
the power receptacle.
In the fuse drawer are two fuses. The one furthers in is the active fuse. The one nearer to the outside is a
spare.
The fuse ratings are labeled on the back of the power supply. Be certain to use only the fuse rating
applicable to your local ac supply voltage.
With a high power amplifier, there can be an appreciable surge of current for a few milliseconds when
power is switched on. Over time, this can fatigue a fuse and cause it to fail at the instant that power is
applied. This may be considered normal.
13
Advertisement
Table of Contents
