Draper FRT300 Assembly Instructions

Read this manual in full before using this product and retain it for future use.
Always use the latest version of the manual. For the latest version of this
manual please visit drapertools.com/manuals
1.

Specification

Stock No.
Part No.
Max. static load:
Max. dynamic load:
Wheel diameter:
Dimensions:
Net weight:
2.

Health and Safety Information

Important: Read these instructions before attempting to assemble, use or
maintain this product. Non-compliance may result in injury or damage to the
user, the product or the load.
• Keep your work area well lit, with bystanders at a safe distance.
• Assemble this product only in the manner depicted and do not modify the
product in any way.
3. What's in the Box?
Carefully remove the product from the packaging and examine it for any
signs of damage that may have occurred during shipment.
Before assembling the product, lay the contents out and check them against
the parts shown below. If any part is damaged or missing, do not attempt to
use the product. Please contact the Draper Helpline; contact details can be
found at the back of this manual.
A. 1 x Trolley platform
B. 2 x Swivel castors
FOLDING
PLATFORM
TROLLEY
04692 – FRT300 ASSEMBLY INSTRUCTIONS
04692
FRT300
300kg
200kg approx.
127mm
L 910 x W 610 x H 870mmm
12.5kg
C. 2 x Fixed castors
D. 16 x M10 x 15mm hex bolts
• Before every use, inspect the trolley for broken or cracked parts and
loose fixtures.
WARNING! DO NOT use this product if its structural integrity
is compromised. Tighten, replace or repair all affected parts
before use.
• Only use this product on firm, level surfaces capable of supporting both
the trolley and its load.
− DO NOT use this product on sloped or slippery surfaces.
− Where available, use ramps to mount kerbs and other raised edges.
• DO NOT ride on or allow others to ride on this product.
• DO NOT exceed the maximum rated capacities of this product.
• When in use, ensure that the load is distributed evenly and that the trolley
is not overbalanced.
− Be mindful of changes to the weight distribution when loading
and unloading.
• ALWAYS ensure that the heaviest part of the load is flat against the
trolley platform.
• Ensure that the load is stable and secure before transporting it.
• Manoeuvre the product using the handle ONLY and maintain full control
of the trolley at all times.
− This product is intended to be pushed; only pull if
absolutely necessary.
• Plan your route and ensure that the castors are not obstructed before
moving the trolley.
• DO NOT leave the trolley unattended while under load.
Please visit drapertools.com for our full range of accessories
and consumables.
Keep the product packaging for the duration of the warranty period in
case the product needs to be returned for repair.
WARNING! Keep packaging materials out of reach of children.
Dispose of packaging correctly and responsibly and in accordance
with local regulations.
(B)
(D)
(A)
E. 16 x M10 spring washers
EN
Original Instructions
Version 1 – January 2023
(C)
(E)