Advertisement
IMPORTANT: PLEASE READ THESE INSTRUCTIONS
CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE
USE OF THIS PRODUCT.
Tray.
Lock assembly.
Frame.
Rear axle assembly.
Front axle assembly.
Wheels (13-inch).
Handle.
120L
TIPPER CART
52628 - GTC/HD
M8x60 Hex head bolt x1
M8x40 Hex head bolt x2
M8x20 carriage bolt x10
M8x20 Hex head bolt x2
M8 Lock nut x15
M8 Washer x15
M11 Washer x10
M12 Washer x4
M12 Lock nut x4
Wheel spacer x4
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Draper GTC/HD
Summary of Contents for Draper GTC/HD
- Page 1 120L TIPPER CART 52628 - GTC/HD IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT. Tray. Lock assembly. Frame. Rear axle assembly. Front axle assembly. Wheels (13-inch). Handle. M8x60 Hex head bolt x1...
- Page 2 HEALTH & SAFETY INFORMATION 1. READ ALL INSTRUCTIONS CAREFULLY BEFORE USE. 2. Do not load the garden cart with more than 450kg. Do not use the tipping feature of the garden cart with more than 225kg. The weight rating is based on an evenly distriubuted load.
- Page 3 ASSEMBLY STEP 1. (FIG.1) Fig.1 Locate the rear axle assembly , the left and right rear struts are pre-assembled to the rear of the axle as shown in Fig.2 STEP 2. (FIG.2) Attach the rear axle assembly to the tray using M8×20 carriage bolts (x4), M11 washers...
- Page 4 ASSEMBLY STEP 4. (FIG.5) Attach the frame to the tray using M8x20 carriage bolts (x2) M11 washers (x2) , M8 washers (x2) and M8 lock nuts Fig.5 STEP 5. (FIG.6) Fig.6 Attach the wheels (x4) by first placing the wheel spacers (x4) onto each axle, then placing the wheel onto the axle and finally the wheel washers (x4) and attach the M12 lock...
- Page 5 USING THE TIPPER CART 4.1 USING THE TIPPING FEATURE - FIG. 8 To operate the tipping feature, pull the tipping release handle outwards to release the tray from it’s locking mechanism. Lift up the release handle to rotate the cart upward into the tipping position. Fig.8 4.2 RETURNING THE TRAY TO ITS LOWERED POSITION - FIG.
- Page 6 NOTES...
- Page 7 NOTES...
- Page 8 - Sales Desk: (023) 8049 4333 - General Enquiries: (023) 8026 6355 - Service/Warranty Repair Agent For aftersales servicing or warranty repairs, please contact the Draper Tools Helpline for details of an agent in your local area. YOUR DRAPER STOCKIST SRDH1216...
Need help?
Do you have a question about the GTC/HD and is the answer not in the manual?
Questions and answers