Advertisement
7. MAINTENANCE
7.1.
Clean and lubricate on a regular basis.
7.2.
Before each use check all parts. If any part of the lift is damaged or suspect, remove the lift from service and take
necessary action to repair.
7.3.
Regularly check oil level via filler hole. With piston fully down remove filler plug, oil should be level with bottom of filler hole.
Top-up as necessary. Use a good quality jack oil such as Sealey Hydraulic Jack Oil. DO NOT use brake fluid.
7.4.
Ensure no dirt enters hydraulic system when filling or removing/replacing components.
7.5.
Keep the lift clean and wipe off any oil or grease. Lubricate all moving parts.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
REGISTER YOUR
PURCHASE HERE
www.sealey.co.uk
MC454E
Issue 1
10/10/22
Advertisement
