Advertisement
Quick Links
ACL805SUW-RDPX
Reader Installation Sheet
EN
Surface Mount Keypad with EM/CASI/HID Proximity reader
Figure 1: Angled front view
Mounting
© 2017 UTC Fire & Security. All rights reserved.
Description
The ACL805SUW-RDPX is a Multiprotocol
digital keypad and proximity reader for
access control applications with backlit
keys and a selectable output protocol.
These surface mount readers includes a
buzzer and a tri-color LED for state
indication (access granted, access denied
or idle).
The ACL805SUW-RDPX is capable of
reading
compatible cards/fobs (125 kHz).
Figure 2: Mounting instructions
1 / 6
Casi
Rusco,
EM
and
HID.
2017-10-13
Advertisement
Summary of Contents for United Technologies interlogix ACL805SUW-RDPX
- Page 1 ACL805SUW-RDPX Reader Installation Sheet Surface Mount Keypad with EM/CASI/HID Proximity reader Description The ACL805SUW-RDPX is a Multiprotocol digital keypad and proximity reader for access control applications with backlit keys and a selectable output protocol. These surface mount readers includes a buzzer and a tri-color LED for state indication (access granted, access denied or idle).
-
Page 2: Specifications
Wiring gray tamp tamp Tamper tamp blue tamp Tamper yellow LED Green minus LED Red minus orange Ground black +12 V 9 to 14 VDC +12 V Data 0 Data 1 green white Figure 3: Wiring instructions Specifications Operating voltage 9 to 14 VDC Current consumption 110 mA at 12 VDC... - Page 3 even parity + 38 data bits + odd parity Pulse width: 100 µs Wiegand 40 description Pause: 1 ms P1 = even parity calculated over the bits 2 to 20 P2 = odd parity calculated over the bits 21 to 39 even parity + 40 data bits + odd parity Pulse width: 100 µs Wiegand 42 description...
-
Page 4: Card Type Selection
Card type selection HID only HID and EM HID and Casi Casi only EM only Settings in TruPortal Software Go to System Administration/Card Formats. Select the Wiegand format that corresponds to the card type: - 32 bit 14443 cascade 1 for EM Cards - 40 bit CASI 4002 for Casi-Rusco Cards - The HID formats available for HID Cards Settings in pcProxConfig Software... - Page 5 Keypad programming flowchart Entering Menu is always done with B(3 s) + 000000 if the Master Code is not changed. Submenu 1 - Change Master Code. The Master Code must be 6 digits. After enrolling new Master Code the ACL875W automatically exits the Menu and the new master code must be typed to enter the menu. Submenu 2 - Select Type of Wiegand.
-
Page 6: Reset Master Code
Submenu 9 - Turns ON/OFF the backlight in idle mode, buzzer on key press, parity bit. Reset Master Code 1. Disconnect Power 2. Press and hold “A” and reconnect Power. 3. Hold the “A” Key for at least 3 seconds. Default Master Code: 000000 Manufacturer UTC Fire &...