CARE AND CLEANING
Wash the glass jug, lid, lid cup and sport bottle & lid in
•
warm soapy water. These parts can also be cleaned in the
dishwasher. Rinse and dry.
DO NOT IMMERSE THE BASE UNIT IN WATER
Half fill the Glass jug with warm water and a small amount of
•
detergent.
Use the 'Pulse' function and hold for 1-2 seconds and release.
•
Repeat 3-4 times.
Remove the jug and rinse under running water.
•
CAUTION: Take care when cleaning the blades as they are
•
extremely sharp.
WARNING: Do not remove the blade assembly from the jug
•
base when cleaning, this could lead to an injury.
To clean the Base unit, use a damp, soft sponge with
•
detergent and wipe over.
SAFETY LOCKING SYSTEM
This Blender was designed with a safety locking system. Unless
the Glass jug is positioned correctly and locked in place, the
Blender will not operate. Follow the below steps to operate:
Place the Base unit on the table with the front facing toward
•
you.
Place the Glass jug onto the Base unit with the handle to the
•
right.
Hold the Base unit with one hand and turn the Glass jug
•
clockwise with the other hand holding the jug handle until
you hear a click. The Blender is now ready for use.
7