Related Manuals for Morphy Richards MRPB20PK
Summary of Contents for Morphy Richards MRPB20PK
- Page 1 Personal Blender INSTRUCTION MANUAL Models: MRPB20B & MRPB20PK Read these instructions carefully before using this appliance for the first time. STORE THESE INSTRUCTIONS CAREFULLY www.morphyrichards.com.au...
-
Page 2: Specifications
SPECIFICATIONS Model: MRPB20B MRPB20PK Colour: Blue Pink Rated Voltage: 7.4V Rated Power: Capacity: 300mL External Dimensions (L x W x H): 95 x 87 x 183mm Net Weight: 450g USB CHARGER SPECIFIATIONS: A USB Charger Supply Unit is not supplied with the appliance. To charge this appliance use a standard USB Charger of DC5V/1A specification with the USB cable supplied. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock, injury to persons or damage to property, follow basic precautions including the following: Do not fully immerse the motor assembly in water or place in the • dishwasher. Read and follow the included specific instructions for use. - Page 4 WARNING: The blending blade is sharp! Handle carefully. Use care • when cleaning and handling the blade – do not touch the blade edges to avoid injury. Do not put any parts of this product in a dishwasher, microwave • oven, sterilising unit or hot water over 60°C –...
- Page 5 After charging, please remove charger by grasping and lifting the • plug end. Don’t pull the wire itself – this may lead to damage of the cord and affect future use. Do not place in or near flammable gases / electric stoves or hot •...
-
Page 6: Read Carefully And Keep For Future Reference
inside a sealed blending cup, which may then erupt on opening and cause burns. When adding ingredients, do not exceed the marked MAX fill line. • If the supply cord is damaged, it must be replaced by the • manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. -
Page 7: Charging Mode
OPERATION INSTRUCTIONS Before using this product for the first time, please: • Use warm soapy water to thoroughly wash the components that will be coming into contact with food i.e. the blending cup and blade and dry with a soft towel. NOTE: The motor assembly itself should be wiped over with a damp cloth and should never be fully immersed in water. - Page 8 NOTE: If the blades become blocked or are otherwise not able to turn freely, the product will stop immediately and the white LED indicator will flash. Whilst the light is flashing, the product will not respond to pressing the button switch. Clear the blades by flipping the unit gently and wait for the light to stop flashing before attempting to begin the blending process again.
- Page 9 CLEANING Turn the unit off and disconnect the motor assembly from the blending cup. Do not use abrasive sponges, scouring pads, bleach or acetone-based product to clean this appliance. Motor assembly can be simply wiped down after use with a damp cloth – it should not be immersed in water or placed into a dishwasher for any reason.
-
Page 10: Troubleshooting
TROUBLE SHOOTING Issue Possible Cause Remedy • • Product does not start Is it used continuously Wait for the motor to cool for a long time? down before using. • • Is the food stuck on the Remove the remaining food blade? and use it again. - Page 11 NOTES...
- Page 12 Recycling: Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection facilities. Contact your local government Glen Dimplex Australia Pty Ltd for information regarding the collection systems 8 Lakeview Drive available. If electrical appliances are disposed Scoresby VIC 3179 of in landfills or dumps, hazardous substances Phone: 1300 556 816 can leak into the ground water, polluting the food...
Need help?
Do you have a question about the MRPB20PK and is the answer not in the manual?
Questions and answers