Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ToolPRO 630873
Summary of Contents for ToolPRO 630873
- Page 1 1100W WET AND DRY VACUUM CLEANER PLU: 630873...
- Page 2 PRODUCT SAFETY GENERAL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Page 3 WET AND DRY VACUUM CLEANER IN THE BOX Extension Tubes (X3) Carry Handle Flexible Hose Outlet - Blower Crevice Tool Floor Tool Side Locking Handle (X2) Foam Filter Tank HEPA Filter On Board Storage / Holders Flexible Hose Base Power Cord Castor Wheels (X4) Filter Basket On/Off Switch...
- Page 4 OPERATING INSTRUCTIONS NOTE: Before using the tool, read the instruction book carefully. Intended Use This product is suitable for cleaning dirt, debris and liquids from garages, workshops, courtyards, patios and garden environment, as well as dust extraction function using the AC outlet for electric power tools.
- Page 5 WET AND DRY VACUUM CLEANER Assembly for Dry Vacuuming – HEPA Filter WARNING: Never use the vacuum without a filter. Check that the filter is securely fitted at all times. The Wet and Dry Vacuum is fitted with the HEPA filter used for dry vacuuming upon purchase. To continue assembly for dry vacuuming, continue to the ‘Fitting the flexible hose’...
- Page 6 Fitting the Flexible Hose Connect the flexible hose to the flexible hose outlet depending on the application required: 1. Vacuuming Connect the flexible hose to the flexible hose outlet – suction by inserting into the outlet and aligning the arrow and locking pin on the end of the flexible hose, with the arrow and ridge on the top of the flexible hose outlet –...
- Page 7 WET AND DRY VACUUM CLEANER 2. Blowing Connect the flexible hose to the flexible hose outlet – blowing by inserting into the outlet and aligning the arrow and locking pin on the end of the flexible hose, with the ridge on the top of the flexible hose outlet –...
-
Page 8: Operation
Operation On/Off switch (Fig M): Switch Position 0: OFF (All operations shut off) Switch Position I: For normal vacuuming operation (wet or dry) - Page 9 WET AND DRY VACUUM CLEANER Dry Vacuuming WARNING: Users must strictly observe all warnings and information contained in section ‘General safety warnings’ and in section ‘Operating Instructions’ before operating this appliance. WARNING: DO NOT use the foam filter for dry vacuuming applications. IMPORTANT: The Wet and Dry Vacuum should only be connected to a mains power supply socket;...
- Page 10 WARNING: Check the HEPA filter regularly for any blockages which may reduce the suction and cause motor overheating. If the vacuum noise changes, immediately switch off the appliance by pressing on the “O” on the ON/OFF switch and check the HEPA filter. Clean the HEPA filter and empty the tank if required.
- Page 11 WET AND DRY VACUUM CLEANER Blowing Function WARNING: Wear a dust mask and eye protection if blowing creates dust that might be inhaled. WARNING: Keep bystanders clear from blowing debris. CAUTION: Any material left in the tank may be blown out, causing injury. 1.
-
Page 12: Maintenance
Maintenance WARNING: You must pull out the power plug from the mains outlet before commencing any cleaning, maintenance or inspection work procedures on the appliance. • Keep all safety devices, air vents and the motor housing and appliance head free of dirt and dust. •... -
Page 13: Troubleshooting
WET AND DRY VACUUM CLEANER TROUBLESHOOTING WARNING: You must pull out the power plug from the mains outlet before commencing any cleaning, maintenance or inspection work procedures on the appliance. Reconnect power to the machine when safe to do so. Problem Possible Cause Possible Solution... -
Page 14: Technical Data
TECHNICAL DATA Type: TVC120S (TVC -designation of machinery, representative of Dry and wet vacuum cleaner) Voltage 230-240V ~ 50/60Hz Rated Power 1100W Tank Capacity Suction hose length 1.5m Real Vacuity 15kpa Suction hose diameter 32mm Power cord length 4.5m IP Rating IPX4 Weight 3.8kg... - Page 16 PLU: 630873 CODE: TVC120S Manufactured and Packaged for SRGS PTY. LTD. ABN 23 113 230 050 6 Coulthards Avenue, Strathpine, Queensland 4500, Australia. COUNTRY OF MANUFACTURE.
Need help?
Do you have a question about the 630873 and is the answer not in the manual?
Questions and answers