Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for ToolPRO 603752
Summary of Contents for ToolPRO 603752
- Page 1 35L Wet & Dry Workshop Vacuum Cleaner PLU 603752...
-
Page 2: Warranty
WARRANTY Our product is guaranteed to be free from quality and manufacturing defects for a period of 12 months. If your product becomes defective during this period, SRGS PTY LTD will offer you either a replacement, credit or refund where a product is faulty; wrongly described; different from the sample shown to you or do not do what they are supposed to do. -
Page 3: General Safety Warnings
GENERAL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. - This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. - Page 4 SYMBOLS Warning Read the operator’s manual Double insulation Wear ear protection Wear dust mask RCM marking ABN: Australian Business Number. By this number, business information such as entity type, status, business location etc. can be found at website http://abr.business.gov.au. ABN of Positec Australia Pty Limited is 14 101 682 357...
-
Page 5: Parts Name
PARTS NAME Carry handle ON/OFF switch Appliance head AC outlet socket On board storage / holders Side locking handle (x2) Flexible hose outlet - Suction Tank Extension tubes (x3) Extension tubes (x3) On board storage / holders On board storage / holders Castor wheels (x4) Drain screw Base... - Page 6 ASSEMBLY WARNING: To prevent serious injury from accidental operation, turn the power switch of the vacuum off and unplug the appliance from its electrical outlet before performing any procedure in this section. Remove the appliance head from the tank by unlocking the 2 x side locking handles pulling them outwards, then upwards.
- Page 7 ASSEMBLY 1. Remove the appliance head from the tank by unlocking the 2 x side locking handles pulling them outwards, then upwards. Place the appliance head upside down onto a flat surface, or on its side (if the carry handle is already assembled). 2.
- Page 8 ASSEMBLY To fit an extension tube to the end of the flexible hose, apply the larger opening end of an extension tube over the end of the flexible hose. To add an additional (2 or 3) flexible tube/s, apply the larger opening end of the extension tube/s over the first extension tube until secure.
-
Page 9: Operation Method
OPERATION METHOD Switch Position 0: OFF (All operations shut off) Switch Position I: For normal vacuuming operation (wet or dry) Switch Position II: Automatic Mode for Power Tool operation. The vacuum motor will only turn ON when a power tool, which is plugged into the AC outlet socket is switched ON. - Page 10 OPERATION METHOD Dry Vacuuming 1. Ensure the tank is completely dry and free from dust and dirt. 2. Only use the HEPA filter for dry vacuuming applications. Ensure you have already fitted the flexible hose, extension tubes, and if required, the floor tool or crevice tool for dry vacuuming applications.
- Page 11 OPERATION METHOD 6. When wet vacuuming, the floating safety valve closes when the maximum tank level is reached. In doing so, the suction noise of the vacuum will change and become louder. When this happens, you must switch off the vacuum and empty the tank.
- Page 12 OPERATION METHOD Automatic Mode for Electric Power Tools 1. Connect the flexible hose to the Flexible Hose Outlet – Suction by inserting into the outlet and aligning the arrow and locking pin on the end of the flexible hose, with the arrow and ridge on the top of the Flexible Hose Outlet –...
- Page 13 OPERATION METHOD Blowing Function 1. Make sure the tank is empty and completely dry before using it as a blower. 2. Connect the flexible hose to the Flexible Hose Outlet – Blower by inserting into the outlet and aligning the arrow and locking pin on the end of the flexible hose, with the ridge on the top of the Flexible Hose Outlet –...
-
Page 14: Maintenance
MAINTENANCE Cleaning • Keep all safety devices, air vents and the motor housing and appliance head free of dirt and dust. • We recommend that you clean and dry the appliance immediately after each use. Cleaning the Appliance Head • Clean the appliance head regularly with a damp cloth and some soap followed by wiping down and drying before storing away. -
Page 15: Specification
SPECIFICATION Mains Voltage: 230-240V ~ 50Hz Vacuum Rated Power: 1200W Maximum Power Consumption of AC Socket Outlet: 1200W Maximum Total Power Consumption: 2400W Tank Capacity: 35L IP Rating: IPX4 Weight (NW): 5.6kg Product Dimensions: 67 x 34 x 34 cm Airflow: 30 L/S... - Page 16 35L Wet & Dry Workshop Vacuum Cleaner Manufactured and packaged for SRGS PTY LTD ABN 23 113 230 050 6 Coulthards Avenue Strathpine QLD 4500, Australia...
Need help?
Do you have a question about the 603752 and is the answer not in the manual?
Questions and answers