Using The Phone As A Remote Control; Using The Message Storage Application - Nokia PD-1 User Manual

If you have searched for Bluetooth devices earlier, a list of the
devices that were found previously is shown first. To start a new
search, press More devices. Select the desired phone and press
Select. Enter the passcode of the phone, if prompted.
4 Go to the Inbox of the phone and open the application file.
5 Select the language for the application and choose whether to install
the application on the phone or memory card, if the phone has a
memory card.

■ Using the phone as a remote control

1 Ensure that Bluetooth is switched on in the Image Album, see
"Adjusting the settings" on page 22.
2 Go to the main menu of the phone and open the Remote control
application. The application starts searching for Bluetooth devices.
3 Use the keys on the phone to operate the Image Album. The
functions of the keys are similar to those on the Image Album remote
control, see "Remote control" on page 8.
To stop using the phone as a remote control, press the end call key on
the phone.
If you get an incoming call when you are using the phone as a remote
control, the Remote control application stops. Restart the application if
you want to continue using the phone as a remote control after the call.
Note that there can be only one Bluetooth connection on at a time.
When you are using the phone as a remote control, you cannot transfer
files from the phone to the Image Album via Bluetooth wireless
technology.

■ Using the Message storage application

1 Go to the main menu of the phone and open the Message storage
application.
2 Select the folder in which the desired message is located and press
Options > Open.
3 Select the message you want to store in the Image Album and
press Send.
Copyright
©
2004 Nokia. All rights reserved.
P h o n e a p p l i c a t i o n s
24