Switching On The Image Album - Nokia PD-1 User Manual

3 Connect the power supply to the power connector of the Image
Album and plug it into the mains outlet.
Figure 5
4 The standby light blinks green. Wait until the Image Album is in
standby mode and the standby light is red.
5 Switch on your TV and select the correct input. See the user guide of
your TV for instructions.

■ Switching on the Image Album

1 Insert the batteries into the remote control.
2 Press the power key on the remote control to switch on the Image
Album. The standby light blinks green until the Image Album is on.
3 Use the scroll key to select your language from the list and press OK
with the left selection key.
4 Use the character keys on the remote control to set the current date
and press OK.
5 Use the character keys on the remote control to set the current time
and press OK.
The Image Album is now ready for use.
If the TV picture quality is poor, check that the position of the NTSC/PAL
switch in the back panel of the Image Album corresponds to your
TV standard, see "Figure 2" on page 7. If you need to change the position
of the switch, restart the Image Album after the change.
Copyright
©
2004 Nokia. All rights reserved.
G e t t i n g s t a r t e d
10