Table of Contents
Advertisement
C C a a l l l l F F u u n n c c t t i i o o n n s s
Two-Touch Dial
Memory locations 10 through 99 are special two-touch
locations.
Press the second digit briefly, then hold down the third
digit of the memory cell.
For example: Location no. 023
Press
briefly and hold down
The number (and name) stored is displayed, then dialed.
Three-Touch Dial
Memory locations 100 through 249 are special three-
touch locations.
Press the first and the second digit briefly, then hold
down the third digit of the memory cell.
For example: Location no. 123
Press
and
down
.
The number (and name) stored is displayed, then dialed.
Note : When several numbers are saved in one
location, only the phone number which is
specified with Set Speed Dial option will be
automatically dialed. For details, refer to the Edit
option under Find Name menu on page 41.
24
.
briefly, then hold
Redialing the Last Number
To redial the last number you called, press
The phone stores the last 20 numbers dialed. To recall
any of these numbers, proceed as follows.
1. If there are any characters on the display, clear the
display by holding down
second.
2. Press
. The list of outgoing calls are displayed.
3. Slide
to scroll through the list until you select the
required name or number.
4. Press
to dial the number displayed.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume,
use the volume keys on the left side of the phone. Press
to increase and
to decrease the volume.
In Standby mode, you can adjust the key tone volume
using the same keys.
C C a a l l l l F F u u n n c c t t i i o o n n s s
twice.
for more than one
25
Advertisement
Table of Contents
