Get started
Install SIM card and battery
Always switch the device off and disconnect the charger
before removing the battery.
The SIM card and its contacts can easily be damaged by
scratches or bending, so be careful when handling,
inserting, or removing the card. The SIM card is inserted
with the gold-coloured contact area on the card facing
downwards (3).
Charge the battery
Charging the BL-6P battery with the AC-6 charger takes
approximately 2 hours while the phone is in the standby
mode.
1 Connect the charger
to a wall socket.
2 Open the cover on
the top of the phone
(1) and connect the
lead from the
charger to the socket
(2).
If the battery is completely discharged, it may take several
minutes before the charging indicator appears on the
display or before any calls can be made.
CA-101 data cable
The CA-101 data cable is used for data transfer and slow
charging the battery while connected to a PC or laptop.
You must download Nokia PC Suite 6.83 to use with your
phone. Updated versions can be added after version 6.83.
Copyright © 2008 Nokia. All rights reserved.
G e t s t a r t e d
13