Packet Data; Monitor All Communication Events; Call Duration - Nokia N93i User Manual

calls only if the network supports these functions, the
device is switched on, and within the network service area.
Tip! When you see a note in the standby mode about
missed calls, select
calls. To call back, scroll to a name or number, and
press .
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press

Call duration

To monitor the approximate duration of your incoming
and outgoing calls, press
Log > Call duration.
To set the display of the call duration while a call is active,
select Applications
call duration > Yes
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code; see "Security",
"Phone and SIM", on page 108.
56 Copyright © 2007 Nokia. All rights reserved.
Show to access the list of missed
Options > Clear recent
.
, and select Applications
> Log > Options > Settings
or No.
Options > Clear

Packet data

To check the amount of data sent and received during
packet data connections, press
Applications >
be charged for your packet data connections by the
amount of data sent and received.

Monitor all communication events

Icons in Log:
Incoming
Outgoing
Missed communication events
To monitor all voice and video
calls, text messages, or data
>
connections registered by the
device, press
select Applications
> Show press to open the general
log. For each communication
event, you can see the sender
or recipient name, phone
number, name of the service
provider, or access point. You
can filter the general log to
view just one type of event and create new contact cards
based on the log information.
, and select
Log > Packet data. For example, you may
,
> Log, and