Nokia N93i User Manual page 116

To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
Access point name
from your service provider.
User name — The user name may be needed to make a
data connection, and is usually provided by the service
provider.
Prompt password
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password — A password may be needed to make a data
connection, and is usually provided by the service
provider.
Authentication — Select
Homepage — Depending on the access point you are
setting up, enter the web address or the address of the
multimedia messaging center.
Select Options >
following settings:
Network type — Select
The other settings depend on the selected network type.
106 Copyright © 2007 Nokia. All rights reserved.
— You obtain the access point name
— If you must enter the password every
Normal or Secure.
Advanced settings to change the
IPv4 settings or IPv6
Phone IP address
your device.
DNS address
address of the primary DNS server. In
addr., enter the IP address of the secondary DNS server.
Contact your internet service provider to obtain these
addresses.
Proxy serv. address
server.
Proxy port number
Wireless LAN
Follow the instructions from your service provider.
WLAN netw. name
for netw.. If you select an existing network,
mode and WLAN security mode
settings of its access point device.
WLAN netw. mode
network and to allow devices to send and receive data
directly; a wireless LAN access point device is not needed.
WLAN security mode
802.1x (not for ad hoc networks), or WPA/WPA2. If you
select Open
802.1x, and WPA functions can be used only if the network
settings.
supports them.
(for IPv4 only) — Enter the IP address of
— In Primary DNS address, enter the IP
Secondary DNS
— Define the address for the proxy
— Enter the proxy port number.
— Select Enter manually
are determined by the
— Select Ad-hoc to create an ad hoc
— Select the encryption used: WEP,
network, no encryption is used. The WEP,
or Search
WLAN netw.