Table of Contents
Advertisement
Select Headset, Loopset,
Text
handsfree,
Music
stand, or
following:
Default
profile—Set the profile that you want activated
each time you connect a certain enhancement to your
device. See 'Profiles—set tones', p. 95.
Automatic
answer—Set if you want the device to answer
an incoming call automatically after 5 seconds. If the
ringing type is set to
Beep once
answer is disabled. Automatic answer is not available for
Text
phone.
Lights
(for music stand and car kit)—Set whether lights
remain on, or are switched off after the time-out.
If you are using a
Text
phone, you must activate it on your
device. Press
, and select
Enhancement
>
Text phone
TV configuration
Press
, and select
Tools
following:
TV
system—Select
PAL
for PAL and SECAM TV system
format or
NTSC
for NTSC TV system format.
Ratio—Select
4:3
or 16:9.
phone,
Bluetooth
Car kit
and from the
or Silent, automatic
Tools
>
Settings
>
>
Use Text phone
> Yes.
>
TV
out. Select from the
Voice commands
You can use voice commands to control your device. For
more information about the enhanced voice commands
supported by your device, see 'Voice dialing', p. 55.
To activate enhanced voice commands for starting
applications and profiles, you must open the
application and its
Profiles
Tools
>
Voice cm.
> Profiles; the device creates voice
tags for the applications and profiles. To use enhanced
voice commands, press and hold
and say a voice command. The voice command is the name
of the application or profile displayed in the list.
To add more applications to the list, select
application. To add a second voice command that can be
used to start the application, select
command, and enter the new voice command as text.
Avoid very short names, abbreviations, and acronyms.
To listen to the synthesized voice tag, select
Playback.
To change voice command settings, select
Settings. To switch off the synthesizer that plays
recognized voice tags and commands in the selected
device language, select
Synthesiser
Copyright © 2006 Nokia. All rights reserved.
Voice cm.
folder. Press
, and select
in the standby mode,
Options
>
New
Options
>
Change
Options
>
Options
>
> Off. To reset voice
109
Advertisement
Table of Contents
