Page 1
BOSCHE Weighing Terminal GTE / GTW Technical Manual Advanced functions - Translation of the original - (keep for future use) Version 2.0 Last revised: 2023-02-24...
The manufacturer's contact data is listed on the reverse of the title page. If you have any queries or problems, please contact the manufacturer without delay. Note If you have any questions for Bosche GmbH & Co. KG, please have the serial number to hand. Version 2.0...
Description | 1 ESCRIPTION ENERAL The weighing terminal GTE / GTW has two menu levels for settings. The function menu serves to create and inquire values, which can be changed easily at any time. The menu protected by a password contains all adjustable parameters techni- cally relevant for weighing and the possibility to calibrate the scales.
1 | Description Weighing Terminal GTE / GTW ONSTRUCTION Item Designation Voltage indicator (lights up when an external power supply (230 V / 12 V mains adapter) is connected). Weighing value display with adjustable backlight. Active weighing range (W2 or W3 at multiple range scales).
Weighing Terminal GTE / GTW Description | 1 1.2.1 ISPLAY VERVIEW Status indication: the weight on Active scale (the display can the scale above the selected only manage one scale). limit value. Status indication: the weight on Hand tare weighing (Pretara the scale below the selected limit value.
Weighing Terminal GTE / GTW Description | 1 1.2.3 EYBOARD OVERVIEW Operating level Functional level Opens the "Quick menu" for Opens the function menu when quick settings the button is pressed during the self-test of the scale. INFO Switch between gross and net Moves the activated digit to the weight.
Weighing Terminal GTE / GTW Value inputs Note The numeric keypad is not available in the GTE version. Numeric keys for enter parameters (tare weights, etc.) Decimal point / decimal separator Clear input value. Is used as a clear key when setting values for parameters or other functions.
Weighing Terminal GTE / GTW Quick menu | 2 UICK MENU Navigation Move the active number to the left <LEFT> G / B Change of the parameter <UP> Saving the settings <ENTER> Leaving the functional level (ESCAPE) PRINT Version 2.0...
2 | Quick menu Weighing Terminal GTE / GTW UICK MENU OVERVIEW Press the ON/OFF button (2 seconds) to switch on the weighing terminal. Then proceed as follows: 2 sec HILoGo MEMory ALIbI Fvnc dISPL Changes to the weighing mode Version 2.0...
Page 15
Weighing Terminal GTE / GTW Quick menu | 2 Quick menu - short description Menu Submenu Option Function A01-00 Settings for the signal light. HiLoGo HLG.Mod 3.CoIor 3-colour mode (High-Low-Go- 4.Co1or 4-colour mode Mode) Signal light is deactivated. Acoustic signal is deactivated.
Page 16
2 | Quick menu Weighing Terminal GTE / GTW Menu Submenu Option Function 000000 Display of a specific entry from „ “ flashing --> A03-00 ALIbII the sum memory. Enter the value using the EdiT.Ab Enter the alibi number to keys <UP>...
Page 17
Weighing Terminal GTE / GTW Quick menu | 2 Menu Submenu Option Function WEi9h a05-00 Weight measuring Fvnc APP5 Covnt Count applikation (Selection of the active appli- HLG.WEI Percentage cation) HLG.CMT AM1nAL Animal weighing function. PEAK PEAK value storage. HOLd HOLD freezes the currently indi- cated measured value.
2 | Quick menu Weighing Terminal GTE / GTW 2.1.1 A01 - O UICK VERVIEW IMIT ALUES Menu navigation HILoGo HiLoGo INFO 2 sec A01-00 HLG.Mod A01-01 beep A01-02 Store A01-03 8ri9hT Version 2.0 BOSCHE Weighing Systems Seite 14 2023-02-24...
Page 19
Weighing Terminal GTE / GTW Quick menu | 2 Quick menu A01-00 - HLG.MOD (High-Low-Go-Mode) Menu navigation A01-00 HLG.Mod HiLoGo INFO 2 sec A01-00 3.CoLor 4.CoLor 3.CoLor DonE Version 2.0 BOSCHE Weighing Systems Seite 15 2023-02-24...
Page 20
2 | Quick menu Weighing Terminal GTE / GTW Quick menu A01-01 - BEEP (Set acoustic signal) Menu navigation A01-01 bEEP HiLoGo INFO 2 sec A01-01 8E OK 8E Lo 8e Hi 8eHiLo 8e OuL DonE Version 2.0 BOSCHE Weighing Systems...
Page 21
Weighing Terminal GTE / GTW Quick menu | 2 Quick menu A01-02 - STORE (Storage of limit values)) A01-02 Menu navigation StorE HiLoGo INFO 2 sec A01-02 DonE Version 2.0 BOSCHE Weighing Systems Seite 17 2023-02-24...
Page 22
2 | Quick menu Weighing Terminal GTE / GTW Quick menu A01-03 - BRIGHT (Settings for the brightness) Menu navigation A01-03 8ri9hT HiLoGo INFO 2 sec A01-03 8ri. 050 flashes Input using the numeric keys Value 0 - 100 DonE Version 2.0...
Weighing Terminal GTE / GTW Quick menu | 2 2.1.4 A04 - P UICK RINT ETTINGS Note If parameters such as the date and time have been turned off on the menu, this can not be printed, even then, if the parameters for date and time have been set to ON.
2 | Quick menu Weighing Terminal GTE / GTW 2.1.5 A05 - F UICK UNCTIONS Menu navigation Fvnc HiLoGo INFO 2 sec A05-00 Apps Covnt AMInAL PEAK HOLd WEi9h Covnt HLG.WEI done HLG.CnMt HLG.WEI done Version 2.0 BOSCHE Weighing Systems...
Page 27
Weighing Terminal GTE / GTW Quick menu | 2 HOLD: The Hold function freezes the currently indicated measured value, to allow you to read it. After pressing the -button the display returns to "0". PEAK: Highest measured value This function displays the highest load value (peak value) of an increasing load.
2 | Quick menu Weighing Terminal GTE / GTW 2.1.6 A06 - D UICK ISPL ISPLAY Menu navigation D1sPL HiLoGo INFO 2 sec A06-00 8.Li9ht bL AU 8L. 10 bL on bl off Enter Value (in seconds) bL AU 10/20/30...120...
Page 29
Weighing Terminal GTE / GTW Quick menu | 2 D1sPL A06-00 8.Li9ht A06-02 A06-01 AU Off AU 10 flashes DonE Enter value 0 - 99 (minutes) GTE: Enter with DonE Version 2.0 BOSCHE Weighing Systems Seite 25 2023-02-24...
3 | Function menu Weighing Terminal GTE / GTW UNCTION MENU Navigation Move the active number to the left <LEFT> G / B Change of the parameter <UP> Saving the settings <ENTER> Leaving the functional level (ESCAPE) PRINT To enter the function menu, the following points should be done: •...
Weighing Terminal GTE / GTW Function menu | 3 UNCTION MENU VERVIEW To access the function menu, proceed as follows: 2 sec C0M1 Press the “INFO“- Button while the scale counts down. C0M 2 time func SPEEd LEgAL F087 Code Changes to the weighing mode Version 2.0...
3 | Function menu Weighing Terminal GTE / GTW hort description UNCTION MENU Menu Submenu Option Function No data are transmitted F01-01 C0M 1 Mode 1 CONT Continous transmission. C0M 2 Mode 2 Do not use for connected prin- ter!
Page 33
Weighing Terminal GTE / GTW Function menu | 3 Menu Submenu Option Function f01-02 C0M 1 oUtP 1 PRinT 1 Citizen CBM C0M 2 outp 2 PRiNT 2 HPP-250 Peripheral devices PRiNT 3 LP-50 (Selection of the attached PRiNT 4 HPP-250 for pallet trucks HLS.
Page 34
3 | Function menu Weighing Terminal GTE / GTW Menu Submenu Option Function F03-01 // Alibi data blocks: an Setting of the saving method of Sin9LE individual file is created for measured data on the USB each measuring day dur- stick.
Page 35
Weighing Terminal GTE / GTW Function menu | 3 Menu Submenu Option Function f06-01 ADC sampling rate Speed SmpLnG Sampling rate of the external ADC (Attention: The setting does usually not require any changes! Effect on the weight calculation!). AL.on...
3 | Function menu Weighing Terminal GTE / GTW 3.2.1 F01 - O COM1 UNKTION MENU VERVIEW Note This manual only describes the settings of interface COM1. The interfaces COM2 is to be set identically. COM1 F01-01 MoDE 1 F01-02...
Page 37
Weighing Terminal GTE / GTW Function menu | 3 Function menu F01-01 - MODE 1 (selection of the transmission mode) F01-01 Mode1 F01-01 COnT F01-02 Note! Automatically changes to the next submenu! Version 2.0 BOSCHE Weighing Systems Seite 33 2023-02-24...
Page 38
3 | Function menu Weighing Terminal GTE / GTW Function menu F01-02 - OUTP 1 (peripheral devices) F01-02 oUTP1 PRINT1 PRINT2 PRINT3 PRINT4 PRINT5 RMTDSP LIGHTS F01-03 9600 Note! Automatically changes to the next submenu! Version 2.0 BOSCHE Weighing Systems...
Page 39
Weighing Terminal GTE / GTW Function menu | 3 Selection of the attached printer or device The indicator transmits the data to different peripheral devices. The peripheral devices must be addressed with specific data formats to interpret or print the received data (from the display) correctly.
Page 40
3 | Function menu Weighing Terminal GTE / GTW PRINT3 Print 2: Data transmitted to printer LP- 50 Data format: N<CR><LF> A0,1,0,0,1,1,B,"01.04.22 14:39:04"<CR><LF> LO0,26,380,3<CR><LF> A0,33,0,0,1,1,B,"Net: Tare: Gross:"<CR><LF> A0,58,0,0,1,1,B," 0.0Kg 0.0Kg 0.5Kg "<CR><LF> LO0,83,380,3<CR><LF> P1<CR><LF> PRINT4 Print 4: Data transmitted to printer HLS Data format: <CAN>_<CAN>_<CAN>_<CAN>_<CAN>_<CAN>_<CAN>_<CAN>_<CAN>_<CA...
Page 41
Weighing Terminal GTE / GTW Function menu | 3 RMTDSP rmtdsp: Data transmitted to large display Data format: ST,GS,+ 0.0Kg<CR><LF> LIGHTS Lights: Data transmitted to signal lamp SL 3 Data format: Signal lamo Off: PC <CR><LF> Signal lamp Yellow: PC <CR><LF>...
Page 42
3 | Function menu Weighing Terminal GTE / GTW Function menu F01-03 - BAUD 1 (baud rate) F01 -03 bAUD1 9600 14400 19200 28800 38400 57600 115200 1200 2400 4800 9600 F01-04 Note! Automatically changes to the next submenu! Version 2.0...
Page 43
Weighing Terminal GTE / GTW Function menu | 3 Function menu F01-04 - PART 1 (parity) F01-04 PART1 COM1 Version 2.0 BOSCHE Weighing Systems Seite 39 2023-02-24...
Page 44
3 | Function menu Weighing Terminal GTE / GTW NWRST Function menu F01-05 - (network reset) F01-05 NWAST1 DoME WAIT COM1 Version 2.0 BOSCHE Weighing Systems Seite 40 2023-02-24...
Weighing Terminal GTE / GTW Function menu | 3 3.2.2 F03 - O UNCTION MENU VERVIEW F03-01 5in9Le MULtPL 5in9Le DonE Version 2.0 BOSCHE Weighing Systems Seite 41 2023-02-24...
3 | Function menu Weighing Terminal GTE / GTW 3.2.3 F04 - O TIME ( UNCTION MENU VERVIEW DATE TIME Note No automatic changing of winter and summer time. time F04-00 HoUr F04-01 F04-02 F04-03 F04-04 Month F04-05 YEAr Version 2.0...
Page 47
Weighing Terminal GTE / GTW Function menu | 3 Function menu F04 - TIME (Time and date) F04-00 HoUr Enter (hours) using the numeric keys. flashes flashes Enter (minutes) using the numeric keys. flashes Enter (seconds) using the numeric keys.
Page 48
3 | Function menu Weighing Terminal GTE / GTW flashes Enter (month) using the numeric keys. flashes Enter (year) using the numeric keys. F04-06 Sh ALL Note! Automatically changes to the next submenu! Version 2.0 BOSCHE Weighing Systems Seite 44...
Page 49
Weighing Terminal GTE / GTW Function menu | 3 Function menu F04 - 06 SHOW (show date/time on the display) F04-06 ShoW F04-06 SHDATE SH.ALL SH.oFF SH.TIME SH.DATE DonE Version 2.0 BOSCHE Weighing Systems Seite 45 2023-02-24...
3 | Function menu Weighing Terminal GTE / GTW 3.2.4 F05 - O UNCTION MENU VERVIEW FUNCTION FUnc F05-01 UnitS F05-02 EHt.dEv Version 2.0 BOSCHE Weighing Systems Seite 46 2023-02-24...
Page 51
Weighing Terminal GTE / GTW Function menu | 3 Function menu F05-01 UNITS F05-01 UnitS SEL 2 SEL 3 SEL 4 SEL 5 SEL 0 SEL 2 DonE Version 2.0 BOSCHE Weighing Systems Seite 47 2023-02-24...
3 | Function menu Weighing Terminal GTE / GTW 3.2.5 F06 - O SPEED UNCTION MENU VERVIEW SPeed F06-01 SMPLnG DonE Version 2.0 BOSCHE Weighing Systems Seite 48 2023-02-24...
The query of the stored alibi values for market surveillance (Bureau of Standards) is located in this menu item. Another way to display stored alibi values is located in the Quick Menu (see separate Operating Manual of the GTE/GTW). LE9AL F01-01 ALbSW AL.on...
Page 54
3 | Function menu Weighing Terminal GTE / GTW F07-02 ALb.SHW F07-02 EditAb EditAb GetL5t F07-02 F07-02 GEtLSt EditAb 000000 flashes Enter using the Number of storded numeric keys. values are displayed. Display Alibi value Version 2.0 BOSCHE Weighing Systems...
Page 55
Weighing Terminal GTE / GTW Function menu | 3 F07-03 Display TAC counter 0 - 9999 F07-03 Version 2.0 BOSCHE Weighing Systems Seite 51 2023-02-24...
4 | Password protected menu Weighing Terminal GTE / GTW ASSWORD PROTECTED MENU In the password-protected menu all verification relevant and technical parameters of the scale are adjusted. Changing the parameter will cause that the scale operates no longer operating intended to their technical specifications.
Weighing Terminal GTE / GTW Password protected menu | 4 ASSWORD PROTECTED MENU VERVIEW Menü-Navigation CoDE C0M1 CoDE INFO Enter the CODE = „0000“ using the <UP> and <LEFT> - - - - keys or the numeric keys then confirm with <ENTER>.
4 | Password protected menu Weighing Terminal GTE / GTW hort description ASSWORD PROTECTED MENU Menu Submenu Option Function P07-01 0; 0.0; 0.00; 0.000; 0.0000; Setting of the desired SETINg dEc1 0.00000 number of digits after the decimal point. Decimal place...
Page 59
Weighing Terminal GTE / GTW Password protected menu | 4 Menu Submenu Option Function p08-01 Display of the current raw SPAN measured value of the A / „67442“ (example) D converter. Two-point cali- bration (zero Calibration of the zero Zero point, load point.
Page 60
4 | Password protected menu Weighing Terminal GTE / GTW Menu Submenu Option Function P09-01 Set the range for Zero-M AU2Ero OFF; 0,25d; 0,5d; 1d; 2d; 3d; 4d “Zero_Tracking”. (Zero tracing function). Off (default) Zero Range Percentage of the capa- P09-02 0;...
Weighing Terminal GTE / GTW Password protected menu | 4 4.2.1 P09 - O ASSWORD PROTECTED MENU VERVIEW SETTINGS Menü-Navigation SET Ing C0M1 CoDE „0000“ SetIn9 INFO P07-01 dEc1 Dezimalstellen P07-02 Increment size P07-03 Capacity P07-04 Overload P07-05 Underload Multi-range/...
Page 62
4 | Password protected menu Weighing Terminal GTE / GTW Function menu P07-01 - DECI (decimal place) P07-01 dEcI 0.000 0.0000 0.00000 0.00 0.000 Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems Seite 58 2023-02-24...
Page 63
Weighing Terminal GTE / GTW Password protected menu | 4 Function menu P07-02 - INC (increment size) P07-02 DonE Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems Seite 59 2023-02-24...
Page 64
4 | Password protected menu Weighing Terminal GTE / GTW Function menu P07-03 - CAP (capacity) P07-03 If multirange/ multi-interval has been selected in the function menu P07-06 (see page 63). CAP.rn1 CAP.max Cap.rn2 Cap.max 020.000 flashes Enter using the numeric keys.
Page 65
Weighing Terminal GTE / GTW Password protected menu | 4 Function menu P07-05 - OLP (overload control) Note This parameter cannot be changed for vericated systems. P07-04 Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems Seite 61 2023-02-24...
Page 66
4 | Password protected menu Weighing Terminal GTE / GTW Function menu P07-05 - ULP (underload control) P07-05 Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems Seite 62 2023-02-24...
Page 67
Weighing Terminal GTE / GTW Password protected menu | 4 Function menu P07-06 - RNIN (setting multi-range / multi-interval) P07-06 rnIn Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems Seite 63 2023-02-24...
4 | Password protected menu Weighing Terminal GTE / GTW 4.2.2 P08 - O ASSWORD PROTECTED MENU VERVIEW Note Acclimatisation of the weighing system to the environment (min.10 minutes) is necessary for successful calibration. Make sure there are no objects on the weighing plate.
Page 69
Weighing Terminal GTE / GTW Password protected menu | 4 Function menu P08-01 - SPAN (calibration with reference weight) P08-01 SPAn Display of the raw measured value P08-01 71882 Take all weights off P08-02 ZEro 71875 the scale. Press the button as...
Page 70
4 | Password protected menu Weighing Terminal GTE / GTW 2000.00 flashes Enter the calibration weight (min. 50 % of the max. weight) (000000-999999) Display of the raw measured value 277663 done P08-13 Load P08-01 SPAn Stored/Clear see chap.4.1 Version 2.0...
Page 71
Weighing Terminal GTE / GTW Password protected menu | 4 Function menü P08-02 - mV-V (theoretical calibration with mV/V value of the load cells) P08-02 Mv-v P08-02 FIELD SEn5 tcap 2ero 5ens Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems...
Page 72
4 | Password protected menu Weighing Terminal GTE / GTW P11-01 SEn5 00.2000 flashes Enter using the numeric keys. GTE: Enter with DonE Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems Seite 68 2023-02-24...
Page 73
Weighing Terminal GTE / GTW Password protected menu | 4 P11-01 P11-01 TCAP 2ero 020000 72423 flashes example Enter using the DonE numeric keys. GTE: Enter with P11-01 2ero DonE P11-01 TCAP Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems...
Page 74
4 | Password protected menu Weighing Terminal GTE / GTW Function menu P08-03 - GRAVITY (correction) P08-03 GrAvTy 9.81301 flashes Enter using the numeric keys. GTE: Enter with DonE Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems Seite 70 2023-02-24...
Page 75
Weighing Terminal GTE / GTW Password protected menu | 4 Function menu P08-04 - CALSL (calibration method) P08-04 CALSL P08-04 FIELD FActorY SPAn FIELD DonE Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems Seite 71 2023-02-24...
4 | Password protected menu Weighing Terminal GTE / GTW 4.2.3 P09 - O ZERO ( ASSWORD PROTECTED MENU VERVIEW ZERO MENU ZEro-M P09-01 Auto Zero AUZero Zero Range P09-02 rnzero P09-03 onzero On Zero Stored/Clear see chap.4.1 Version 2.0...
Page 77
Weighing Terminal GTE / GTW Password protected menu | 4 P09-02 rnzero P09-03 onzero P09-01 AUzero DonE 0.25d 0,5d DonE DonE Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems Seite 73 2023-02-24...
4 | Password protected menu Weighing Terminal GTE / GTW 4.2.4 P10 - RESET (R ASSWORD PROTECTED MENU ESET TO FACTORY SETTINGS reset P10-01 DonE Stored/Clear see chap.4.1 Version 2.0 BOSCHE Weighing Systems Seite 74 2023-02-24...
Need help?
Do you have a question about the GTE and is the answer not in the manual?
Questions and answers