How To Replace: Lamp; Troubleshooting; What To Do If - AEG BPE548070B User Manual

11.6 How to replace: Lamp

WARNING!
Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until
the oven is cold.
Top lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

12.1 What to do if...

In any cases not included in this table please contact with an Authorised Service Centre.
The oven does not turn on or does not heat up
Problem
You cannot activate or operate the oven.
The oven does not heat up.
Before you replace the lamp:
Step 2
Disconnect the oven from the
mains.
Check if...
The oven is correctly connected to an electrical
supply.
The automatic switch-off is deactivated.
TROUBLESHOOTING
Step 3
Put a cloth on the bottom of
the cavity.
69/148