Summary of Contents for 3T-Components 3T-MOTORS 3T45-10B
Page 1
Motor type 3T35-B (For shafts from 60 mm) (For shafts from 40 mm) 3T45-10B 3T35-10B 3T45-20B 3T35-13B 3T45-30B 3T45-40B Attention: It is important for the safety of persons to follow these instructions. Keep these instructions for future reference. www.3t-components.de WEEE-Reg.-Nr.: DE 77028333...
All contents of these instructions, in particular texts, photographs and graphics, www.3t-components.de are protected by copyright. Unless expressly indicated otherwise, the copyright is held by 3T-Components GmbH & Co. KG. Please ask us if you wish to use the contents of this document. 3T-MOTORS Tubular motors | Table of contents...
GUIDELINE With this guide, you can determine the ideal torque in Newton meters (Nm) for the shutter motor. DETERMINE WEIGHT ROLLER SHUTTER 1.) Determine roller shutter area Width (Height + 150 mm) x Width = Roller shutter area (m²) 2.) Determine weight roller shutter material Material kg / m²...
SAFETY INSTRUCTIONS Please read these important safety instructions before commissioning! Incorrect installation can cause serious personal injury and damage to property. The warranty claim expires in case of non-observance of this user information with all contained notes and regulations. In case of non-observance of these instructions, the manufacturer or supplier shall not be liable for any personal injury or property damage incurred. GENERAL SAFETY INSTRUCTIONS WARNING: Important safety instructions.
FUNCTION OVERVIEW SCOPE OF DELIVERY – MOTOR TYPE 3T45-B SCOPE OF DELIVERY – MOTOR TYPE 3T35-B Motor Motor Limit switch adapter Limit switch adapter Shaft adapter Shaft adapter Connection cable 3 meters Connection cable 3 meters Universal bearing & cotter pin Universal bearing &...
INSTALLATION NOTES Before installation, all non-essential electrical wiring must be removed, all mechanisms that are not necessary for motorized operation must be deactivated. Do not expose the tubular motor to crushing, impact, falling or contact with any liquids. • Do not punch holes in the entire length of the tube (motor casing) or attach screws to it. Please use suitable suspension springs to fasten the roller shutter curtain to the roller shutter shaft.
INSTALLATION INSTRUCTIONS Please note: The motor can be installed on the right-hand side as well as on the left-hand side. • If the direction of rotation is reversed, please exchange the wires for the up and down direction. The setting of the end positions is only possible in the installed state (motor in shutter shaft). •...
Page 8
INSTALLATION INSTRUCTIONS Motor type 3T45-B Motor type 3T35-B Installation with universal bearing or cover cap bearing / clip bearing Installation with universal bearing or clip bearing Universal bearing Clip bearing Universal bearing Clip bearing Cover cap bearing Installation with universal bearing: Installation with universal bearing: Push the motor with the square into the opening of the bearing Push the motor with the square into the opening of the bearing...
INSTALLATION INSTRUCTIONS Remove shutter shaft: Lower the roller shutter. • Open the cover of the roller shutter box. • Release the suspension springs from the roller shutter shaft. • Lift roller shutter shaft incl. ball bearing out of the holder. •...
INSTALLATION INSTRUCTIONS On the opposite side of the motor, push the roller capsule out of the roller shutter shaft until it fits into the ball bearing inserted in the wall bearing. • Fix roller capsule to roller shutter shaft with self-tapping screw. Position the screw at a punched hole. This prevents the screw from slipping. •...
INSTALLATION INSTRUCTIONS Setting the end positions: Setting the end points with set button Setting the end points with adjustment cable ESK Connect tubular motor to switch or timer Connect tubular motor to ESK Up button Set button Down button Test the direction of rotation of the motor and change it if necessary. Test the direction of rotation of the motor and change it if necessary.
INSTALLATION INSTRUCTIONS MOUNTING INSTRUCTIONS FOR 3T-MOTORS MINI-TUBE MOTORS MOTOR TYPE 3T35-B Use proper suspension springs: To fasten the roller shutter curtain to the roller shutter shaft, please be sure to use • suitable suspension springs for motor operation. These special mini suspension springs only protrude approx.
INSTALLATION INSTRUCTIONS INSTALLATION AWNING MOTOR Preparation: Attention: Screw in awning & secure with straps or ropes. • Awning arms are under strong tension! Remove awning from wall bracket & place on safe surface. • Prepare motor for installation: Slide limit switch adapter flush against motor head. >...
INSTALLATION INSTRUCTIONS Slide the side bearing with universal bearing onto the support tube & fasten. > fig. 3.9 • Ensure that the motor square spigot is properly engaged in the universal bearing. > fig. 3.10 • Secure the motor square spigot with the supplied cotter pin. >...
INSTALLATION INSTRUCTIONS Setting the end positions: Setting the end points with set button Setting the end points with adjustment cable ESK Connect tubular motor to switch Connect tubular motor to ESK Up button Set button Down button Test direction of rotation Test direction of rotation Press Up button (Arrow up) = Awning moves IN Press Up button = Awning moves IN...
TROUBLESHOOTING WHAT TO DO WHEN ..the motor does not run? Mains voltage is missing. • Check correct connection of the control (switch or timer). • ... the motor is running in the wrong direction? Swap the two wires for the direction of rotation (brown + black). •...
EU Konformitätserklärung Wir, die Firma 3T Components GmbH & Co. KG Bahnhofstr. 34 55578 Wallertheim Deutschland erklären in alleiniger Verantwortung, dass das weiter unten genannte Produkt Geräteart: Rohrmotor mit elektronischen Endschaltern Modell Artikelnummer 3T35-10B 3T35-13B 3T45-10B 3T45-20B 3T45-30B 3T45-40B die grundlegenden Anforderungen der aufgeführten EG/EU-Richtlinien erfüllt: 2014/35/EU Niederspannungsrichtlinie 2014/30/EU...
OPTIONAL ACCESSORIES TUBULAR MOTORS ADAPTER SETS 3T35 | ADAPTER SETS 3T45 | MOTOR BEARINGS Adapter set 40 mm round Adapter set 50 mm 8-sided Limit switch adapter Shaft adapter Limit switch adapter Shaft adapter Adapter set for 40 mm round shaft Adapter set for octagonal shafts SW50 •...
Page 19
OPTIONAL ACCESSORIES TUBULAR MOTORS ANTI-LIFT DEVICE | SHUTTER SHAFTS | ROLLER CAPSULE | SUSPENSION SPRINGS | BALL BEARINGS OCTOCLICK Anti-lift device 2-link / 2,5-link Burglar-resistant • The pushing up of a closed motorized roller shutter is prevented • For tubular motors with electronic or mechanical limit switching •...