Table of Contents
Advertisement
Quick Links
INSTALLATION &
OPERATING INSTRUCTIONS
Instructions and notes for installation and operation
3T-MOTORS Radio shutter / awning motors
with mechanical limit switches + emergency manual operation
Motor type 3T45-RNH
(For shafts from 60 mm)
3T45-20RNH
3T45-40RNH
Attention:
It is important for the safety of persons
to follow these instructions.
Keep these instructions for future reference.
www.3t-components.de
|
WEEE-Reg.-Nr.: DE 77028333
INTELLIGENT
DRIVES &
CONTROLS
FOR SHUTTERS
AND AWNINGS
Smart Home Ready with everHome
Control via smart phone, tablet, PC or via
voice commands with Alexa or Google Assistant
Advertisement
Table of Contents
Related Manuals for 3T-Components 3T-MOTORS 3T45-20RNH
Summary of Contents for 3T-Components 3T-MOTORS 3T45-20RNH
- Page 1 + emergency manual operation Motor type 3T45-RNH (For shafts from 60 mm) 3T45-20RNH 3T45-40RNH Attention: It is important for the safety of persons to follow these instructions. Keep these instructions for future reference. www.3t-components.de WEEE-Reg.-Nr.: DE 77028333...
-
Page 2: Table Of Contents
Unless expressly indicated otherwise, the copyright is held by 3T-Components GmbH & Co. KG. Please ask us if you wish to use the contents of this document. 3T-MOTORS Radio tubular motors | Table of contents... -
Page 3: Guideline / Determine Torque
GUIDELINE With this guide, you can determine the ideal torque in Newton meters (Nm) for the shutter motor. DETERMINE WEIGHT ROLLER SHUTTER 1.) Determine roller shutter area Width (Height + 150 mm) x Width = Roller shutter area (m²) 2.) Determine weight roller shutter material Material kg / m²... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS Please read these important safety instructions before commissioning! Incorrect installation can cause serious personal injury and damage to property. The warranty claim expires in case of non-observance of this user information with all contained notes and regulations. In case of non-observance of these instructions, the manufacturer or supplier shall not be liable for any personal injury or property damage incurred. GENERAL SAFETY INSTRUCTIONS WARNING: Important safety instructions. -
Page 5: Function Overview
FUNCTION OVERVIEW SCOPE OF DELIVERY – MOTOR TYPE 3T45-RNH Motor Limit switch adapter Shaft adapter Connection cable 3 meters Universal bearing & cotter pin Securing bracket Adjustment pin Emergency hand crank eyelet Manual FUNCTION OVERVIEW – MOTOR TYPE 3T45-RNH APPLICATION SUITABLE FOR Limit switch Motorized radio shutters... -
Page 6: Manual Emergency Operation
MANUAL EMERGENCY OPERATION To operate the awning or roller shutter manually in an emergency, insert the emergency hand crank eyelet into the opening provided for this purpose (> fig. 1) on the motor head and secure it with the fastening screw (>... -
Page 7: Installation Instructions
INSTALLATION INSTRUCTIONS Please note: The motor can be installed on the right-hand side as well as on the left-hand side. • If the direction of rotation is reversed, please exchange the wires for the up and down direction. The setting of the end positions is only possible in the installed state (motor in shutter shaft). •... -
Page 8: Remove Shutter Shaft
MONTAGEANLEITUNG Remove shutter shaft: Lower the roller shutter. • Open the cover of the roller shutter box. • Release the suspension springs from the roller shutter shaft. • Lift roller shutter shaft incl. ball bearing out of the holder. • Prepare motor for installation: Push limit switch adapter flush against motor head. -
Page 9: Shutter Motor Wiring
INSTALLATION INSTRUCTIONS On the opposite side of the motor, push the roller capsule out of the roller shutter shaft until it fits into the ball bearing inserted in the wall bearing. • Fix roller capsule to roller shutter shaft with self-tapping screw. Position the screw at a punched hole. This prevents the screw from slipping. •... -
Page 10: Setting The End Positions
INSTALLATION INSTRUCTIONS Setting the end positions: Explanation of the limit switch screws There are 2 limit switch screws on the motor head. One limit switch screw is responsible for the upper end position, the other for the lower end position. The end positions can be adjusted by turning the limit switch screws with the adjustment pin. - Page 11 INSTALLATION INSTRUCTIONS Special case: Roller shutter rolls down in front of motor + shaft If the roller shutter curtain rolls in front of the motor and shaft, the responsibilities of the limit switch screws for the upper and lower end positions are reversed. See illustration of left-right installation page 10: upper end position >...
-
Page 12: Installation Radio Awning Motor
INSTALLATION INSTRUCTIONS INSTALLATION RADIO AWNING MOTOR Preparation: Attention: Screw in awning & secure with straps or ropes. • Awning arms are under strong tension! Remove awning from wall bracket & place on safe surface. • Prepare motor for installation: Slide limit switch adapter flush against motor head. >... -
Page 13: Radio Awning Motor Wiring
INSTALLATION INSTRUCTIONS Slide the side bearing with universal bearing onto the support tube & fasten. > fig. 3.9 • Ensure that the motor square spigot is properly engaged in the universal bearing. > fig. 3.10 • Secure the motor square spigot with the supplied cotter pin. >... -
Page 14: Setting The End Positions
INSTALLATION INSTRUCTIONS Setting the end positions: Explanation of the limit switch screws There are 2 limit switch screws on the motor head. One limit switch screw is responsible for the „EXTEND” position, the other for the „RETURN” position. By turning the limit switch screws with the adjustment pin, the positions of the limit switch can be adjusted. A detailed description of the limit switch screws and the markings on the motor head can be found on page 10. -
Page 15: Programming Radio Transmitter
PROGRAMMING RADIO TRANSMITTER Important when teaching, changing or deleting transmitters: Only one relevant motor may be switched to voltage! Several radio motors or radio receivers can be programmed to form a group with the same transmission channel. For multi-channel transmitters, channel by channel must be taught or transferred. Pairing handheld transmitters After switching on the power supply, programming (pressing the buttons) must be carried out within 10 seconds. -
Page 16: Delete Handheld Transmitter
PROGRAMMING RADIO TRANSMITTER Delete handheld transmitter: Programming (pressing the buttons) must be carried out within 10 seconds. Otherwise the motor returns to its original state. Attention! Deleting the handheld transmitter deletes all paired transmitters on the radio motor. Beep while Beep while pressing pressing... -
Page 17: Troubleshooting
TROUBLESHOOTING WHAT TO DO WHEN ..the motor does not run? Mains voltage is missing. • Transmitter was not paired correctly. • ... the motor is running in the wrong direction? Change the direction of rotation by pairing the transmitter again (see Change direction of rotation of radio motor > page 16). •... -
Page 18: 3T Components Gmbh & Co. Kg
EU Konformitätserklärung Wir, die Firma 3T Components GmbH & Co. KG Bahnhofstr. 34 55578 Wallertheim Deutschland erklären in alleiniger Verantwortung, dass das weiter unten genannte Produkt Geräteart: Rohrmotor mit integriertem Funkempfänger 433MHz Modell Artikelnummer 3T45-40RNH 3T45-20RNH die grundlegenden Anforderungen der aufgeführten EG/EU-Richtlinien erfüllt: 2006/42/EG Maschinenrichtlinie 2014/30/EU... - Page 19 OPTIONAL ACCESSORIES TUBULAR MOTORS ANTI-LIFT DEVICE | SHUTTER SHAFTS | ROLLER CAPSULE | SUSPENSION SPRINGS | BALL BEARINGS OCTOCLICK Anti-lift device 2-link / 2,5-link Burglar-resistant • The pushing up of a closed motorized roller shutter is prevented • For tubular motors with electronic or mechanical limit switching •...
-
Page 20: Email: Info@3T-Components.de
Social Media Links Info, news and tips on roller shutters, awnings, smart home and more: www.facebook.com/3TComponents bit.ly/youtube-3TComponents www.instagram.com/3tcomponents twitter.com/3TComponents 3T-Components GmbH & Co. KG Bahnhofstr. 34 55578 Wallertheim Email: info@3t-components.de Tel: +49 (0) 6732-600 03 69 Fax: +49 (0) 6732-600 54 30 www.3t-components.de...