Nokia N73 User Manual page 99

Nokia n73: user guide
Hide thumbs Also See for N73:
Table of Contents

Advertisement

To edit the settings of an access point, select
Edit. Follow the instructions from your service provider.
Connection
name—Enter a descriptive name for the
connection.
Data
bearer—Select the data connection type.
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
Must be defined
or with a red asterisk. Other fields can be
left empty, unless you have been instructed otherwise by
your service provider.
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Packet data
Follow the instructions from your service provider.
Access point
name—You obtain the access point name
from your network operator or service provider.
User
name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
Prompt
password—If you must enter the password every
time you log in to a server, or if you do not want to save
your password in the device, select Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
Options
>
Authentication—Select
Homepage—Depending on the access point you are
setting up, enter the Web address or the address of the
multimedia messaging center.
Select
Options
following settings:
Network
type—Select the Internet protocol type to use:
IPv4 settings
on the selected network type.
Phone IP address
your device.
DNS
address—In
address of the primary DNS server. In
server:, enter the IP address of the secondary DNS server.
Contact your Internet service provider to obtain these
addresses.
Proxy serv.
server.
Proxy port
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data
are in a network that supports packet data, the device
Normal
or Secure.
>
Advanced settings
to change the
or
IPv6
settings. The other settings depend
(for IPv4 only)—Enter the IP address of
Primary name
serv.:, enter the IP
Second. name
address—Define the address for the proxy
number—Enter the proxy port number.
conn.—If you select
When available
Copyright © 2006 Nokia. All rights reserved.
and you
99

Advertisement

Table of Contents
loading

Table of Contents