Wlan Internet Access Points - Nokia E72 User Manual

To change the priority order of access points within a
group, scroll to an access point and
Organise Change
>
Packet data access points
Select Menu Ctrl. panel
>
Destinations
>
instructions on the screen.
To edit a packet data access point, open one of the
access point groups, and select an access point marked
with .
Follow the instructions from your service provider.
Select from the following:
Access point name
•
name from your service provider.
User name — The user name may be needed to
•
make a data connection, and is usually provided by
your service provider.
Prompt password
•
password every time you log in to a server, or if you
do not want to save your password in the device,
select Yes.
Password — A password may be needed to make
•
a data connection and is usually provided by your
service provider.
Authentication
•
your password encrypted or
password encrypted when possible.
Homepage — Depending on the access point you
•
are setting up, enter the web address or the address
of the multimedia message centre.
138
Use access point
•
you want the device to ask for confirmation before
Options
priority.
and Connectivity
Access point, and follow the
— You obtain the access point
— If you must enter the
— Select Secure to always send
Normal to send your
— Select After confirmation
the connection using this access point is created, or
Automatically
>
the destination using this access point
automatically.
Select Options
following:
>
Network type
•
to transfer data to and from your device. The other
settings depend on the selected network type.
Phone IP address
•
address of your device.
DNS addresses
•
primary and secondary DNS servers, if required by
your service provider. To obtain these addresses,
contact your internet service provider.
Proxy server address
•
proxy server.
Proxy port number
•
the proxy server.

WLAN internet access points

Select Menu
Connection
follow the instructions on the display. Or, open one of
the access point groups, select an access point marked
with , and select Edit.
Use the instructions provided by your service provider
to edit the following:
WLAN network name
•
Search for
network,
security mode
if
access point device.
if you want the device to connect to
Advanced settings
>
— Select the internet protocol type
(for IPv4 only) — Enter the IP
— Enter the IP addresses of the
— Enter the address of the
— Enter the port number of
Ctrl. panel Settings
> >
Destinations Access
> >
— Select Enter manually
networks. If you select an existing
WLAN network mode and
are determined by the settings of its
and from the
and
point, and
or
WLAN