Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for TECHNIMOUNT PRO Series
Summary of Contents for TECHNIMOUNT PRO Series
- Page 1 BRACKET PRO SERIE ® USER GUIDE...
-
Page 2: Copyright
Copyright 2022 Technimount E.M.S. Holding Inc. (Technimount), an affiliated company of Technologies CGC Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Technimount or its affiliate companies. -
Page 3: Contact Information
For any issues with your Technimount product, its components, or for any technical questions during the installation or maintenance processes, please send an email to techsupport@technimount.com. Please have the serial number of your Technimount product available (as shown in the figure below) when calling Technimount Technical Support. Include the serial number in all written communications. -
Page 4: Table Of Contents
Cleaning Solutions...............................23 Removal of Iodine Compounds ...........................23 Preventive Maintenance .............................23 Inspection Process and Schedule..........................24 Maintenance Program ............................24 Inspection and Maintenance Record .........................25 Training Record ................................26 Replacement Parts ...............................27 WARRANTY ................................28 Warranty Policy ................................28 Limited Responsibility and Warranty .........................28 BP71-UG-202207-02 www.technimount.com... - Page 5 RETURN POLICY ..............................29 Return Policy ................................29 Prior to 30 Days ..............................29 Prior 45 Days ................................29 Prior 60 Days ................................29 Return Authorization ..............................29 Damaged Merchandise ..............................30 Claim Process ................................30 Required Information ............................30 Findings and Conclusion .............................30 Questions about our Policy ............................30 www.technimount.com BP71-UG-202207-02...
-
Page 6: Symbols And Definitions
INTRODUCTION SYMBOLS AND DEFINITIONS SYMBOL DESCRIPTION Warning and Caution, special attention is required. Consult accompanying documents Safe working load symbol and Load balance symbol Return to Table of Contents BP71-UG-202207-02 www.technimount.com... -
Page 7: Warning/Caution/Note
NOTE Provides special information about the product. Return to Table of Contents www.technimount.com BP71-UG-202207-02... -
Page 8: Product Illustration
INTRODUCTION PRODUCT ILLUSTRATION BRACKET PRO SERIE 71 Front View Adjustment Knob Locking Assembly Block Technimount Molded with Black-Anodized Finish Polyurethane Transport Handle Bottom Micro Disc Front Support Plate with Black-Anodized Finish Return to Table of Contents BP71-UG-202207-02 www.technimount.com... -
Page 9: Back View
INTRODUCTION PRODUCT ILLUSTRATION (CONTINUED) BRACKET PRO SERIE 71 Back View Adjustment Plate Red Quick Release Mechanism Acetal Feet Anti-Rotation Micro Disc Return to Table of Contents www.technimount.com BP71-UG-202207-02... -
Page 10: Introduction
INTRODUCTION PURPOSE OF THE DOCUMENT This user guide is designed to assist you with the installation, operation and maintenance of the Technimount Bracket Pro Serie 71 for the Philips IntelliVue X3 Monitor. PRODUCT DESCRIPTION The Bracket Pro Serie 71 is a mounting system for the Philips Intellivue X3 monitor with or without Microstream Extension. -
Page 11: Technical Specifications
Contact Technimount EMS for more information or for other options at customerservice@technimount.com * Product and medical equipment manufacturers names are trademarks™ or registered trademarks® of their respective holders. Technimount does not have a commercial relationship with these medical equipment manufacturers. Return to Table of Contents www.technimount.com... -
Page 12: Summary Of Safety Precautions
9 Do not place additional equipment or items onto the bracket or mounts other than approved Technimount or components, as this could damage the product and may result in injury to the patient or operator. - Page 13 9 Inspect regularly all components on the equipment for any issue and loose screws, bolts and nuts. 9 Never install the mount into or on other similar mounting systems or brackets without written confirmation by Technimount EMS as these different systems may be from other brands or models and may not be compatible with Technimount Systems.
-
Page 14: Notice
The end user and administrator are responsible to validate regulations and standards for safety in their region, in order to comply with applicable safety regulations. Technimount is not responsible to inform the end user and/or administrator of applicable legislation for safety in their area. -
Page 15: Installation Guide
9 Electrical tools are not recommended, as there is a potential risk of damage to the threads. 9 During the installation process, Technimount recommends the use of medium strength thread-locking adhesive (blue Loctite) to prevent the screws from loosening during normal use. Put a few drops of medium strength thread- locking adhesive (blue Loctite) on each screw before installation. -
Page 16: Installation Of The Dock, Monitor And Microstream Into The Bracket
2. The Bracket is shipped fully assembled. To install the Philips Intellivue X3, remove the two (2) screws from the front support plate. 3. Align and insert the IntelliVue X3 Dock into the main assembly. Return to Table of Contents BP71-UG-202207-02 www.technimount.com... - Page 17 (blue Loctite 242) on each screw before installation to prevent the screws from loosening during normal use. 7. Tighten both screws. CAUTION 9 Do not use electrical tools to install the screws. 9 Do not overtighten the screws. Return to Table of Contents www.technimount.com BP71-UG-202207-02...
-
Page 18: Monitor
9 Ensure that the monitor is proprely inserted and locked by gently pulling on the monitor. 3. The Philips IntelliVue X3 Monitor, in its Dock is ready to transport once properly inserted into its bracket and the stretcher mounting system. Return to Table of Contents BP71-UG-202207-02 www.technimount.com... -
Page 19: Microstream And Monitor
4. The Philips IntelliVue X3 Monitor and the Microstream CO Extension is ready for transport once properly inserted into its bracket and the stretcher mounting system. Return to Table of Contents www.technimount.com BP71-UG-202207-02... -
Page 20: Operation Guide
9 Always remove the medical device by sliding it to the right. Do not slide it forward. MONITOR AND MICROSTREAM 4. To remove the Philips IntelliVue X3 Monitor and Microstream from the bracket, press and hold the Red Quick Release Mechanism. Return to Table of Contents BP71-UG-202207-02 www.technimount.com... - Page 21 6. Take the handle of the Philips IntelliVue X3 Monitor and slide it to the right to remove from the bracket. CAUTION 9 Always remove the medical device by sliding it to the right. Do not slide it forward. Return to Table of Contents www.technimount.com BP71-UG-202207-02...
-
Page 22: Maintenance Guide
Cleaning procedure below does NOT provide recommendations for cleaning of the medical device. The following cleaning guidelines consider the Technimount mounting assemblies and components. It is the responsibility of each hospital to use the cleaning solution of their choice. All hospitals have policies and procedures describing how they should clean and disinfect their medical equipment. -
Page 23: Cleaning Solutions
PREVENTIVE MAINTENANCE A preventive and regular maintenance program should be established for all Technimount equipment. Preventive maintenance may be required more frequently based on the usage level of the product. The bracket requires regular preventative maintenance. -
Page 24: Inspection Process And Schedule
If you are unsure as to how to perform these maintenance inspections or at what interval to perform these inspections, please contact your Technical Support Team at techsupport@technimount.com. Check each routine and replace damaged or worn out parts if necessary. -
Page 25: Inspection And Maintenance Record
MAINTENANCE GUIDE INSPECTION AND MAINTENANCE RECORD PREVENTIVE MAINTENANCE DATE TIME PERFORMED Return to Table of Contents www.technimount.com BP71-UG-202207-02... -
Page 26: Training Record
MAINTENANCE GUIDE TRAINING RECORD DATE TRAINING METHOD BASIC TRAINING TRAINEE NAME TRAINING UPDATE Return to Table of Contents BP71-UG-202207-02 www.technimount.com... -
Page 27: Replacement Parts
The parts and accessories listed are all currently available for purchase. Some of the parts identified on the assembly drawing parts in this user guide may not be individually available for purchase. Please call Technimount Customer Service: + 1 888.639.2758 or at customerservice@technimount.com... -
Page 28: Warranty
Technimount products are intended to retain a medical device in place in the case of a single crash impact. A Technimount product must NOT be used again if it was involved in a crash. The product MUST be replaced. If the Purchaser uses a Technimount product following a crash, it is at the Purchaser’s own risk and Technimount will not be... - Page 29 ▪ Product must be undamaged and in its original packaging ▪ The product return request must be provided in writing and it must be approved by TECHNIMOUNT prior to returning the product ▪ Returns will not be approved on a modified or damaged item ▪...
- Page 30 If the RMA request is approved, TECHNIMOUNT will provide you with an RMA number for your claim. We will also include instructions for the replacement of your product. No product return will be accepted without the RMA number labeled on the outside of the box being returned.
- Page 32 Technimount E.M.S. Holding Inc. 3770 Jean-Marchand Street, Suite 100-C Quebec (QC) G2C 1Y6 Canada T + 1 581.700.6613 TF + 1 888.639.2758 technimount.com info@technimount.com © 2022 Technimount E.M.S. Holding Inc. - All Rights Reserved Printed in Canada...
Need help?
Do you have a question about the PRO Series and is the answer not in the manual?
Questions and answers