Cell Broadcast; Messaging Settings - Nokia E55 User Manual

Send service commands
You can send a service request message (also known as a
USSD command) to your service provider and request
activation for certain network services. Contact your service
provider for the service request text.
To send a service request message, select
commands. Enter the service request text and select
Options > Send.

Cell broadcast

Select Menu Messaging
>
With the cell broadcast network service, you can receive
messages on various topics from your service provider, such
as weather or traffic conditions in a particular region. For
available topics and relevant topic numbers, contact your
service provider. Cell broadcast messages cannot be received
when the device is in the remote SIM mode. A packet data
(GPRS) connection may prevent cell broadcast reception.
Cell broadcast messages cannot be received in UMTS (3G)
networks.
To receive cell broadcast messages, you may need to turn cell
broadcast reception on. Select
Reception > On.
To view messages related to a topic, select the topic.
To receive messages related to a topic, select
Subscribe.
© 2010 Nokia. All rights reserved.
Options
>
and Options Cell broadcast.
>
Options Settings
>
Options
Tip: You can set important topics as hot topics. You are
notified in the home screen, when you receive a
message related to a hot topic. Select a topic and
Options
To add, edit, or delete topics, select
Service

Messaging settings

Select Menu
Open the message type in question, and define all fields
marked with
Your device may recognise the SIM card provider and
configure the correct text message, multimedia message,
and GPRS settings automatically. If not, contact your service
provider for the correct settings, order the settings from your
service provider in a configuration message, or use the
Settings wizard application.
Text message settings
Select Menu
message.
Select from the following:
>
Message centres
•
for your device, or add a new one.
Message centre in use
•
the message.
>
Character encoding
•
automatic character conversion to another encoding
system when available.
> Hotmark.
Options
Messaging and Options
>
Must be defined or with a red asterisk.
Messaging and Options
>
— View the available message centres
— Select a message centre to send
— Select Reduced support
> Topic.
> Settings.
Settings Text
> >
to use
51