Xtrem Bots PATROL XT380972 Instructions Manual page 6

3. BATTERIES INSTALLATION
IN THE TRANSMITTER
1. Use a philips' head screw to open the battery compartment lid of controller.
2. Put 2 x 1.5V "AA" batteries inside the battery compartment.
3. Put the lid back and use a screw to tighten the lid.
IN THE ROBOT
Robot battery is into the back of the Patrol.
To charge battery, please insert the USB port provided USB charging
cable to anyone USB port of a power pack, a mobile charger, a car
charger or a computer.
Switch OFF the robot before charging. A light in the robot will be
turned on during the charging process; when the robot is fully
charged the light will turn off .
The charging time is about 2 hours and the playing time is about 2
hours.
4. START THE PATROL
Switch on the ON/OFF button on the chest of the robot to start
the Patrol.
6