Do you have a question about the ELITE TROOPER and is the answer not in the manual?
Questions and answers
Gareth
February 19, 2025
Robot is not turning on. Charge light comes on when plugged in, but robot doesn't come on at all after charging. I have changed the battery and still no luck.
1 comments:
Mr. Anderson
February 19, 2025
If the Xtrem Bots ELITE TROOPER robot is not turning on after charging, even with a new battery, possible reasons include:
1. Power Switch: Ensure the robot’s power switch (WŁ./WYŁ.) is turned on. 2. Battery Installation: Confirm the battery is correctly installed and securely connected. 3. Charging Status: Verify that the charging process was completed; the LED should turn off when fully charged. 4. Battery Issues: Even a new battery may be faulty; try charging again or using a different battery. 5. Electrostatic Discharge Interference: If the toy malfunctions due to electrostatic discharge, reset it. 6. Connection Issues: Check for loose or damaged battery connectors. 7. Over-Discharge Protection: If the battery was over-discharged, it may need a longer charging time or replacement.
Following these steps should help identify and resolve the issue.
Page 2
Pociski Instrukcja obsługi Kabel 1. WPROWADZENIE Cześć! Jestem Elite Trooper z rodziny Xtrem Bots. Jestem superrobotem i posiadam wiele umiejętności. Umiem chodzić, ślizgać się, strzelać, tańczyć i mówić. Moją misją jest przybycie na Ziemię, aby Ci pomóc. Zostań moim dowódcą! Przed użyciem, przeczytaj instrukcję...
Page 3
KONTROLER Programowanie Demo Mowa Tryb tańca Ślizgaj się do przodu Idź do przodu Ślizgaj się w prawo Idź w lewo Demo strzelanie Strzelaj Idź w prawo Ślizgaj się w lewo Ślizgaj się do tyłu Idź do tyłu Podnieś lewą rękę Podnieś...
2. OSTRZEŻENIA I UWAGI Symbol przekreślonego kosza oznacza, że baterie, akumulatorki, ogniwa guzikowe, Zużyty sprzęt elektryczny baterie akumulatorowe itp. nie mogą być i elektroniczny (WEEE) utylizowane razem z odpadami komunalnymi. Jeżeli urządzenie nie jest użytkowane, Baterie zawierają substancje szkodliwe dla środowiska i wyjmij baterie i przechowuj je oddzielnie.
Czas ładowania to około 2 godzin. Czas pracy to około 2 godzin. 4. URUCHAMIANIE ELITE TROOPERA Przełącz przycisk WŁ./WYŁ. znajdujący się z tyłu Elite Troopera i naciśnij przycisk Stand-by, aby uruchomić robota. Elite Trooper przedstawi się i pokaże kilka ruchów oraz wyda różne dźwięki. UWAGA: Robot powinien stać na podłodze.
5. PODSTAWOWE FUNKCJE Ślizgaj się do przodu Ślizgaj się do tyłu Ślizgaj się w lewo Ślizgaj się w prawo Strzelanie Stop Idź do przodu Wycisz Idź do tyłu Zmniejsz głośność Idź w lewo Zwiększ głośność Idź w prawo Podnieś lewą rękę Podnieś...
Page 7
Po ponownym naciśnięciu przycisku Stand-by, robot wybudzi się i znów zaprezentuje swój powitalny pokaz. 7. TRYB DEMO Naciśnij przycisk trybu demo na kontrolerze. Elite Trooper zatańczy, pokaże kilka ruchów i wyda różne dźwięki. 8. PROGRAMOWANIE 1. Naciśnij przycisk programowania i przytrzymaj go do czasu usłyszenia krótkiego dźwięku.
Page 8
10. TRYB MOWY Naciśnij przycisk mowy na kontrolerze. Robot zacznie mówić w swoim języku. 11. STRZELANIE Przyciski „Strzelaj” i „Demo strzelanie” służą do wystrzeliwania pocisków. Po naciśnięciu przycisku „Demo strzelanie”, robot zacznie strzelać, poruszy się i znów wystrzeli. Po naciśnięciu przycisku „Strzelaj”, robot wystrzeli jeden pocisk.
Page 9
Wire 1. INTRODUCTION Hello! I am Elite Trooper of the Xtrem Bots family. I am a super robot and I have many skills. I can walk, glide, shoot, dance and speak. Now my mission is to come to Earth to help you.
Page 10
TRANSMITTER Programming Demo Speech Dance mode Glide Forward Walk forward Glide right Walk left Demo shooting Shoot Walk right Glide left Glide backward Walk backward Left arm up Right arm up Left arm down Right arm down Turn down Turn up volume volume Mute...
Page 11
2. CAUTIONS AND ADVICES The crossed-out dustbin symbol indicates that batteries, rechargeable batteries, button cells, battery packs, etc. must not be put in WEEE the household waste. Batteries are harmful When this appliance is out of use, please to health and the environment. Please help to protect remove all batteries and dispose of them the environment from health risks.
The charging time is about 2 hours and the playing time is about 2 hours. 4. START THE ELITE TROOPER Switch on the ON/OFF button on the back of the Elite Trooper and push the “StandBy” button to start the Elite Trooper. The Elite Troo- per introduce himself performing some movements and sounds.
5. BASIC FUNCTIONS Glide forward Glide backward Glide to the left Glide to the right Shooting Stop Walk forward Mute Walk backward Turn down volume Walk to the left Turn up volume Walk to the right Left arm up Right arm up Left arm down Right arm down Wark or glide forward...
Before the robot go into StandBy mode, it will emit some sounds in advice. By pressing the button the Elite Trooper goes on StandBy Mode and stays sleep until this button would be pressed again. By pressing it again the robot will wake up and will perform the “intro” again.
Page 15
10. ROBOT SPEECH Press the “Speech” button on the transmitter. The Robot will start speaking a Robotic Language. 11. SHOOTING “Shoot” and “Demo Shooting” buttons are for shooting the missiles. Pushing “Demo Shooting” button the robot shoots, moves, and shoots again. Pushing “Shoot”...
Page 16
www.xtrembots.com ZAWARTOŚĆ / CONTENT KONTROLER ROBOT CONTROLLER BATERIE AKUMULATOREK AA LR06 Li-Po 600 mAh BRAK W ZESTAWIE W ZESTAWIE BATTERIES BATTERY AA LR06 Li-Po 600 mAh NOT INCLUDED INCLUDED PRODUCENT / MANUFACTURED BY: BLUE ROCKET™. Room 307, Heng Ngai Jewelry Centre, 4, Hok Yuen Street East, Hunghom, Kowloon, Hong Kong.
Need help?
Do you have a question about the ELITE TROOPER and is the answer not in the manual?
Questions and answers
Robot is not turning on. Charge light comes on when plugged in, but robot doesn't come on at all after charging. I have changed the battery and still no luck.
If the Xtrem Bots ELITE TROOPER robot is not turning on after charging, even with a new battery, possible reasons include:
1. Power Switch: Ensure the robot’s power switch (WŁ./WYŁ.) is turned on.
2. Battery Installation: Confirm the battery is correctly installed and securely connected.
3. Charging Status: Verify that the charging process was completed; the LED should turn off when fully charged.
4. Battery Issues: Even a new battery may be faulty; try charging again or using a different battery.
5. Electrostatic Discharge Interference: If the toy malfunctions due to electrostatic discharge, reset it.
6. Connection Issues: Check for loose or damaged battery connectors.
7. Over-Discharge Protection: If the battery was over-discharged, it may need a longer charging time or replacement.
Following these steps should help identify and resolve the issue.
This answer is automatically generated