BVR Instruments TS1 Quick Manual

Controls
1/3
TS1
Starting the TS1 after powering up.
MENU allows to start the TS1 after the splash screen and to
quit the screensaver if activated.
Quick Guide
Enable and disable the Edit mode.
Successive EDIT push allows you to enter and exit Edit mode.
Starting and stopping the sequencer.
Successive START/STOP push allow to start & stop the sequencer.
Note: In Song mode START : start the sequencer in Song mode.
Select a mode. Trigger, Drums Sequence 1,2,3,4, Song, Settings.
MODE selector (rotate) select one of 9 modes
Note: Access to Scene mode: SHIFT + MODE Settings.
Access to a page menu. (Excluding settings mode).
MENU + SELECT (rotation): Previous/next page.
Exiting a menu quickly. (Without returning to the default page).
Pressing EDIT once: exits a menu.
Access to a parameter in a page menu.
SHIFT + SELECT (rotation): previous/next parameter.
Changing a parameter value.
Thank you for choosing bvr-Instruments and the trigger/sequencer.
SELECT (rotation): previous/next Value.
You will find in this booklet, how to start with your TS1.
Full documentation at: https://bvr-instruments.net/support
Validation of an action in a page menu.
SELECT (Push). Validate the action.
Selection of a Pattern, Song or Scene.
Action Sequencer state New selection
SHIFT + SELECT stop Immediate
(rotation)
play When SHIFT released