Table of Contents
Advertisement
If a notice indicating re-
NOTE:
ceiving text message is displayed
in the standby mode, press Read
to read the received message.
When the received message is
more than one, you are connect-
ed to Inbox directly by pressing
List.
Write a message
(Menu 2-1-2)
Writes and sends a text message.
1. Write a message on the write message
screen.
2. Select
Send
in Options menu.
3. Input the receiver's phone number.
4. Input the call back number. The default
is your phone number.
If you press Options on the write message
screen, you can select the following op-
tions.
• Send
• Insert numbers
• Insert symbols
• Other characters
• Save to archive
• Insert templates
• Message settings
• Urgent
If selecting
NOTE:
plates, you can edit the message
saved in the phone.
Insert tem-
31
Page (Menu 2-1-3)
Transmits the call back number to the re-
ceiver.
1. Input the receiver's phone number to
page and press OK.
2. Input the call back number and press
OK or
. The default is your phone
number.
Outbox (Menu 2-1-4)
You can view the text message sent or to
send. If you press Options on the message
content screen, you can select Erase, Send,
Save to archive
options.
The sent message is displayed as
the unsent mesage is displayed as
the message list.
Archive (Menu 2-1-5)
You can save the desired message for a
long time. You can erase, send or answer
the archived message.
Template (Menu 2-1-6)
You can edit and send the saved message.
The way to edit and send is the same as
that of
Write message
Erase all (Menu 2-1-7)
All read (Menu 2-1-7-1)
You can erase all the messages archived in
inbox, outbox, archive except the unread
message.
and
in
menu.
Advertisement
Table of Contents
