Nokia 7710 User Manual page 48

settings > E-mail...), you can continue by configuring
advanced mailbox settings.
Retrieval page
Retrieve: — Specifies what will be retrieved from the
remote mailbox when the connection is established. The
Messages option is only available if the mailbox type is
IMAP4.
E-mail size limit: — Define the maximum size of a message
that is retrieved when you select
menu command. The minimum is 1 KB and maximum
1000 KB. If the limit is exceeded, only the header of the
message will be retrieved.
No. of e-mails to retrieve:
message headers you want to display in Inbox. If you
retrieve new headers and the total amount of headers in
Inbox exceeds this limit, the older headers will be
removed. This option is only available if the mailbox type
is IMAP4.
Password authentication:
encrypt the sending of passwords to a remote mail server.
Retrieve e-mails to inbox:
this account to your Inbox. If not selected, the messages
are received to separate mailbox folders outside your
Inbox.
Sending page
Default e-mail format:
write and send from your smartphone.
48 Copyright © 2005 Nokia. All rights reserved.
E-mail > Retrieve and send
— Define the number of new
— Used with POP3 protocol to
— Select to receive messages from
— The type of mail that you can
Send e-mail: — How mail is sent from your smartphone.
Include original in reply: — Select to include the original
message when replying to a message.
Request read report: — If you select this option, you will
receive a notification when the recipient has opened your
mail. You can only receive a notification if the recipient's
e-mail application supports this feature.
Outgoing server (SMTP) page
Authentication required: — Select this if the SMTP (Simple
Mail Transfer Protocol) server requires authentication.
Some servers require that the user is authenticated before
e-mail can be sent.
User name: — Write your user name for the SMTP server.
Password: — Write your password for the SMTP server.
Other page
Security — Define the server security protocol.
Incoming e-mail port: — Enter the port number of the
incoming mail server. Normally you do not have to change
the default value.
Outgoing e-mail port: — Enter the port number of the
outgoing mail server. Normally you do not have to change
the default value.
Access point in use: — Select whether you want to connect
using any available access point or choose the access
point you want to use when connecting.