General Page; Individual Page; Realplayer Settings; Network - Nokia 7710 User Manual

General page

The settings on this page override all individual settings.
Define the following:
Position request rule: — Define the global privacy setting.
Select Use individual req. rules
define for each contact and service on the
Select Confirm first to be prompted for the acceptance of all
location requests regardless of the setting on the
page. SelectAlways acceptor Always reject
reject location requests regardless of the settings on the

Individual page.

Valid until: — Define the time limit for the acceptance or
rejection, if defined. When the time limit has been reached,
the privacy level switches to
Notify when position sent: — Define the global notification
setting. This option is only available, if you have set the
verification policy to Always
Individual page
On the Individual page, you can define the privacy settings
for a specific contact or service.
The page consists of a list of contacts and services that
have specific privacy settings. When a contact or service
has requested a location, it may be added to the privacy
list. You can only add contacts to the list within this dialog.
To add a contact, tap Add, tap a contact in the list and
tap Close. Define the individual privacy settings. The
to use the settings that you
Individual page.
Individual
to accept or
Use individual req. rules.
accept.
options are similar to ones defined on the Global page.
Tap Close to proceed.
To edit a contact, tap Edit, and modify the individual
privacy settings. The options are similar to ones defined
on the Global page. Tap Close
For more information on selecting contacts, see "Viewing
and searching for contacts" on page 60.

RealPlayer settings

Go to Desk > Control panel
Define the following:

Network

Data speed::— Select the connection speed. Note that the
options Very fast and Slow may affect the video quality.
Connection time-out: — Select the time period in seconds
after which the connection closes, if the connection is not
successful.
Server time-out: — If the server is not able to send enough
data and a lot of buffering takes place, you may need to
define a server time-out.
Port range: — The range of port numbers used for the
connection. The default values are the same as those for
Internet settings.
Copyright © 2005 Nokia. All rights reserved.
to proceed.
> RealPlayer settings.
111