Table of Contents
Advertisement
8-82613-X (V3)
EuroSmart Class D
Siren Amplifier
Thank you for purchasing this Haztec product. Before proceeding with installation, it is essential to read
and understand this instruction manual.
▪ Available as siren only or with optional
2 or 8 programmable switched outputs
▪ Battery voltage monitor
▪ Adjustable power output
▪ Variable volume
Basic operating specifications:
Supply Voltage Range:
Maximum Current Draw:
Standby current
Amplifier Output Range:
Recommended Fuse Rating:
Dimensions:
1
When in sleep mode the siren is drawing a small amount of current. Therefore, it is recommended that
an isolator switch is fitted to prevent battery drain when the vehicle is not in use for long periods of time
M373.1.1
Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK
10-30VDC
22A @ 12V / 11A @ 24V
0.1A in standby / 0.016A during sleep
10-200W
30A @ 12V / 15A @ 24V
125mm x 132mm x 43mm
T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk
▪ Over temperature shutdown
▪ Non-destructive short circuit protection
▪ Non-destructive reverse polarity protection
▪ RRB channel
- 1 -
1
October 2022
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Haztec EuroSmart 8-82613-X
Summary of Contents for Haztec EuroSmart 8-82613-X
- Page 1 8-82613-X (V3) EuroSmart Class D Siren Amplifier Thank you for purchasing this Haztec product. Before proceeding with installation, it is essential to read and understand this instruction manual. ▪ Over temperature shutdown ▪ Available as siren only or with optional ▪...
- Page 2 Ensure that all connections are well made and protected from corrosion Limited Warranty: ▪ Haztec International Ltd. warrants this unit to be free from defective material and workmanship and agree to repair or replace if proven defective through normal use and occurs within two years of the purchase date ▪...
- Page 3 Appendix 12…. Drawings & Schematics 18-20 Appendix 13…. Installation Appendix 14…. CANbus Networking M373.1.1 - 3 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
-
Page 4: Installation
➢ DO NOT insert the fuse until the installation is complete ➢ Refer to the tables in Appendix 11 for fuse ratings M373.1.1 - 4 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk... - Page 5 ▪ With optional 8-way switched output board – see over page for key M373.1.1 - 5 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
- Page 6 A minimum void of 50mm around the siren must be kept clear to allow for heat dissipation and even air flow M373.1.1 - 6 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
- Page 7 Please note that the Reset/Setup button is also used to read and configure the impedance and power settings M373.1.1 - 7 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
-
Page 8: Appendix 3 | Main Wiring Harnesses
Radio Re-broadcast Input 2 [-] Radio Re-broadcast Input 1 [+] Red/White Radio Re-broadcast Input 1 [-] M373.1.1 - 8 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk... - Page 9 Switched Output 1 wiring Switched Output 2 (Fig.1 +ve switching) (Fig.2 -ve switching) M373.1.1 - 9 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
- Page 10 T4b: 4-way Control Input Connector Terminal Wire Function Colour Blue Yellow User programmed Green Violet M373.1.1 - 10 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
-
Page 11: Appendix 6 | Speaker Installation
➢ For two or more speakers connected in series: = Z x N M373.1.1 - 11 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk... - Page 12 ▪ Repeat the verification process to confirm that the changes have been saved M373.1.1 - 12 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
- Page 13 No. of button presses Speaker power (long LED flash) (Watts) 100* * Default setting M373.1.1 - 13 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
-
Page 14: Appendix 10 | Wiring Instructions
Positive feeds over 2m must be extended using an adequate AWG size cable to prevent a voltage drop exceeding 1V M373.1.1 - 14 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk... -
Page 15: Appendix 11 | Specifications
(see Appendix 10 for wiring instructions) 12-way low current connector: All ancillary inputs including 2 x RRB M373.1.1 - 15 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk... - Page 16 Required to accommodate electrical connectors, wiring harnesses and maintain air flow around the siren to assist with heat dissipation – see Appendix 13 M373.1.1 - 16 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
-
Page 17: Appendix 12 | Basic Dimensions
8-82613-X (V3) EuroSmart Class D Siren Amplifier Appendix 12 | Basic Dimensions M373.1.1 - 17 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk... -
Page 18: Cooling Fan
If the siren is to be installed vertically the cooling fan must be positioned uppermost COOLING RESET BUTTON & STATUS LED M373.1.1 - 18 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk... - Page 19 A minimum of 50mm must be left clear around the siren to ensure even airflow. DO NOT allow the cooling fan or inlet vents to become blocked or obstructed M373.1.1 - 19 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
- Page 20 Looms should be smoothly formed and not at immediate right angles from the connector body as this will put strain on the terminals and also risk disconnection from the siren M373.1.1 - 20 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
- Page 21 Fig.3 M373.1.1 - 21 - October 2022 Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk...
Need help?
Do you have a question about the EuroSmart 8-82613-X and is the answer not in the manual?
Questions and answers