Advertisement
Controls
UP / DOWN Button: Select menu items.
ESC Button: Return to Main menu.
Product Function
Main functions of battery tester include:
battery test, cranking test, charging test
and other additional functions.
Battery test - Analyzes the battery State of Charge,
State of Health, CCA, Current Voltage, and Internal
Resistance. This provides reliable analysis data for the
test and maintenance of the battery. User is notified
in advance to replace the battery once it has aged.
Cranking test - Tests and analyzes the ability of
the battery to supply starting power to the vehicle
engine by evaluating the battery ability to hold up
the required voltage when applied to a load.
Product / System Setup
Adjustments and settings:
Enter the System Setup menu:
From the second startup screen, press ESC
button to enter Main menu. Press DOWN
button to select the System Setup function.
Contrast: Adjusts the contrast of the LCD display.
1. From System Setup menu, use UP and
DOWN buttons to highlight Contrast,
then press ENTER button.
Technical Parameters
1. Cold Cranking Amps Measure Range: Refer
to Specifications section on page 4.
2. Voltage Measure Range: 5V-17V DC.
Note: There are four primary functions of a
vehicle battery. It is important to test and maintain your
battery to ensure it properly performs these functions:
Item 58759
For technical questions, please call 1-888-866-5797.
ENTER Button: Confirm menu selection.
Note: There are several reasons why the starting motor
could operate abnormally. For example: Poor lubrication
can cause the loaded torque of the starter to increase,
it can also cause rotor friction of the starting motor.
Charging test - Checks and analyzes the
charging system to determine if the output
voltage of the alternator is normal.
Note: If one of the above functions is working
improperly, it can lead to over charge or incomplete
charge of the battery. This can damage the battery,
leading to a greatly shortened life cycle.
2. From Contrast menu, Use UP and DOWN
buttons to select the desired contrast value,
then press ENTER button to save your
selection and return to previous menu.
Tool Information: Shows the product
version and date produced.
1. From System Setup menu, use Enter
button to select Tool Information. Press
ESC to return to the Main menu.
1. Supplies energy to the starter and other
vehicle functions during starting.
2. Makes up for deficiencies of energy supplied by
the generator or alternator during operation.
3. Stores excess energy created by the
generator or alternator during operation.
4. Buffers the voltage in the vehicle electrical
system, protecting components from damage.
Page 5
Advertisement
