Download Print this page

Viking 58759 Owner's Manual & Safety Instructions page 4

12v digital battery & system tester

Advertisement

Specifications
Display
Battery Voltage
Application
Tester Voltage
Range Capacity
Battery Type
Battery CCA
Range
Battery AH Range 7-250 Ah
Lowest Operating
Voltage
Test Record
Storage
Operating
Temperature
Storage
Temperature
Power
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: This Tester is powered by the battery being
tested. No additional battery is required.
1. The battery should be rested 30 minutes
before testing. Vehicle should be turned
off with no accessories operating.
2. Attach clamps securely to the battery terminals,
red to positive (+), black to negative (-).
Terminals should be cleaned prior to testing.
Page 4
LCD
12V
5V-17V
Standard, AGM, GEL, EFB
40~2000 CCA
>5V (Between 4-5, if the orange LED indicator is
lit, this means alerting voltage is out of range).
10 records
0°C to 50°C (32°F to 122°F)
-20 °C to 70°C (-4°F to 158°F)
Provided via cable from car battery
For technical questions, please call 1-888-866-5797.
3. Test a single 12V battery only. Do not connect
this Tester to a series of batteries or an electrical
system containing more than one 12V battery.
Do not connect to any other electrical
system; damage to the Tester will result.
4. Be careful not to damage the Tester. Avoid
dropping it or dropping items onto it. Do
not expose to moisture or chemicals.
5. The Tester may be used continuously
without overheating.
Item 58759

Advertisement

loading