Advertisement
CHAPTER 2 OPERATIONS
CHAPTER 2 OPERATIONS
2. 2. Ba
Basi sic O
c Ope
pera rati tion
2.1 Sta
2.1
Start-Up
rt-Up Seq
2. 2.1. 1.1 1 O O u u t t l l i i n n e e
The system program used to control the host machine is stored on the hard disk drive. The
The system program used to control the host machine is stored on the hard disk drive. The
CPU on the system controller PCB calls the system program from the hard disk drive to the
CPU on the system controller PCB calls the system program from the hard disk drive to the
main memory fitted to the DIMM socket of the system controller PCB for use. This is why
main memory fitted to the DIMM socket of the system controller PCB for use. This is why
it takes a while before the control panel becomes ready after the control panel power soft-
it takes a while before the control panel becomes ready after the control panel power soft-
ware switch of the host machine is turned on, during which time the following screen ap-
ware switch of the host machine is turned on, during which time the following screen ap-
pears in the control panel.
pears in the control panel.
The progress of the start-up sequence is indicated by the progress bar on the screen.
The progress of the start-up sequence is indicated by the
2-2
2-2
COPYRIGHT © 2000 CANON INC. 2000 2000 2000 2000
COPYRIGHT © 2000 CANON INC.
on
Sequen
uence (
ce (hos
host ma
2000 2000 2000
t mach
chine
ine) )
Wait...
Wait...
Progressive bar
Progressive bar
F02-201-01
F02-201-01
2000 CANON NW Multi-PDL P. kit-A1 REV.0 SEPT. 2000 PRINTED IN USA
CANON NW Multi-PDL P. kit-A1 REV.0 SEPT. 2000 PRINTED IN USA
progress bar on the screen.
Advertisement
