Function Descriptions - Sentry ST 723 Instruction Manual

4-4 Function Descriptions

In Scan mode, the current measurement is displayed
on the main display. The main display will hold the last
values until the tachometer automatically turns off.
Memory mode:
The tachometer can store or recall 10 selectable
M A X m e a s u r e m e n t s , 1 0 s e l e c t a b l e M I N
measurements, 10 selectable AVG measurements
and 10 selectable DATA measurements.
To store a measurement:
Press the MEAS button until the reading displayed
on the LCD display. Observe the reading and press
the M button to record. The maximum, minimum,
average and data during one shot measurement
will be stored into a memory set. Then the Data
number will increase by one.
To recall the stored data from memory:
Use the M button to scroll and view the stored data point.
a) See the flow chart 1 for a brief presentation of how
to recall the stored data sequentially.
b) See flow chart 2 for a brief presentation of how to
quick access or leap the data set to the next.
Stored data points will appear in the main display. Empty
memory locations will read "-----". Maximum, minimum
and average data will appear in the RPM, rPm, I/M,
M/M, Y/M and F/M display with MAX/MIN/AVG symbol.
10