Optional Features - BECKWITH ELECTRIC M-7679 Manual

Standard Control Features
• Over 30 protection functions
• Horizontal or Vertical Mounting
• 50 Hz or 60 Hz Frequency
• High (90 to 315 Vac/Vdc) or Low (18 to 60
Vdc) Power Supply
• IPScom Communications Software
• IPSlogic Programmable Logic
• Synchrophasors (IEEE C37.118-2)▲
• Load Encroachment Supervision
• Phantom Voltage
• Digital 86 Lockout
• I/O Map
• Smart Fuse Coordination
• Custom Curve Designer
• Hot-Line Tag
• Fault Locator
• Eight Setting Profiles
• Compare Settings Tool
• Multi-Shot Auto Recloser, Three-Phase
Reclose Operation
• Sequence Coordination
• Cold Load Pickup
• Auto Restoration
• Reclosing Sequence Monitor & Recorder
• Recloser/Breaker Wear Monitor
• Power Quality Monitoring
• THD/TDD Monitoring, Alarming and
Protection
• ITIC Curve Violation Counters and
Recording
• Demand and Energy Metering
• Power Supply Monitor
• Trip/Close Coil Monitor
• Data Logging
• Sequence of Events Recording
• Trip and Target Counters
• Digital Fault (Waveform) Recording
• Fault Event Records
• Self-Diagnostics
• Three Phase Current Inputs plus one
Ground or Sensitive Earth Current Input
• Three Phase Voltage Inputs plus one Sync
Check Voltage Input
• IRIG-B Time Synchronization (TTL)
• Front Panel USB and SD Card ports
▲ Feature available at future date via firmware update / IPScom update
▲
▲
–3–
M‑7679 Recloser Control – Specification
• PORT 1: Rear TIA-232 or TIA-485
• Protocols Included:
– MODBUS ®
– DNP3.0 SAv2
– Smart P2P (Peer-To-Peer)
• Four User Programmable Digital Inputs
• Four User Programmable Digital Outputs
• Conformal coated circuit boards
• Configurable Front HMI LEDs and
Pushbuttons
• 12 Vdc Backup Power Input
• SMTP E-mail server
• Web Browser Interface
• IEEE 1686 Standard Compliant Cyber
Security
• IPsec (Internet Protocol Security)
• RADIUS Client Capability to manage local
and remote access to the control
• Wide Variety of Communications
Accessories

Optional Features

• Independent Phase Capable (Triple/
Single) Recloser Operation
• PORT 1 – Fiber Optic Available
• PORT 2 – Rear Ethernet Fiber Optic or
Copper
• PORT 3 – Rear Ethernet Fiber Optic or
Copper
• PORT 4 – TIA-232, TIA-485, or Fiber Optic
• Optional Protocols in addition to standard
MODBUS and DNP3.0 (requires at least
one Ethernet Port):
– Add IEC 61850
– Add IEC 60870-5-104/101
– Add Combination IEC 61850 and
IEC 60870-05-104/101
• Expanded I/O – Additional eight digital
Inputs and eight digital Outputs for a total
of 12 each
• Low Energy Analog (LEA) Inputs per
C37.92. Configurations available: 4 LEA,
3LEA + 1VT, or 6LEA.
▲
▲
▲
▲