Security - Nokia 6280 User Manual

Nokia 6280: user guide
Hide thumbs Also See for 6280:
Table of Contents

Advertisement

Preferred access point
to view the name of the service provider, data bearer, and packet data access point or GSM dial-up number.
Connect to serv. support
supported by the service provider
Personal config. settings
To add a new personal account if you have not added any, select Add; otherwise, select
Select the service type, and select and enter each of the required parameters. The parameters differ according
to the selected service type. To delete or activate a personal account, scroll to it, and select
Activate.

■ Security

When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls still may
be possible to the official emergency number programmed into your device.
Select
Menu
>
Settings
PIN code request
and
UPIN code request
phone is switched on. Some SIM cards do not allow the code request to be turned off.
PIN2 code request
— to select whether the PIN2 code is required when using a specific phone feature which is
protected by the PIN2 code. Some SIM cards do not allow the code request to be turned off.
Call barring service
— to restrict incoming calls to and outgoing calls from your phone (network service). A
barring password is required.
Closed user group
— to specify a group of people whom you can call and who can call you (network service)
Security level
>
Phone
the phone. If you select
memory is selected, and you want to change the memory in use.
Access codes
— to change the security code, PIN code, PIN2 code, or barring password
— to view the saved access points. Scroll to an access point, and select
— to download the configuration settings from your service provider if this is
— to add new personal accounts for various services, and to activate or delete them.
>
Security
and from the following options:
— to set the phone to ask for your PIN or UPIN code every time the
— to set the phone to ask for the security code whenever a new SIM card is inserted into
Security level
> Memory, the phone asks for the security code when the SIM card
Copyright © 2006 Nokia. All rights reserved.
Options
>
Details
Options
>
Add
new.
Options
>
Delete
or
75

Advertisement

Table of Contents
loading

Table of Contents