Descaling; Frequently Asked Questions - Primo Water PR407IB Manual

PR407IB
• If the unit has not operated for a long time, the light
this case, press the ON/OFF button to return the unit to its normal state.
• Change the water in the water reservoir at least once a day to guarantee clean
ice. When you are not using the appliance, immediately drain the water from
the water tank through the drainage opening, this is to prevent contamination
and algae formation in stagnant water. Always use fresh water when you use
the appliance again.
• If the operation of the unit has been interrupted by, for example, a shortage of
water or a power outage, it will take 3 minutes for the unit to restart.
Descale the appliance regularly to prevent limescale build-up to keep the
appliance operating properly. To do this, use descaling agent for coffee makers, for
example, or 1/2 vinegar diluted with 1/2 water.
• Fill the water tank with the agent (do not exceed the maximum level) and turn
on the appliance. Then press the clean function
• The unit will now pump water through the entire unit. This cycle will repeat
itself for 5 times.
• The device will automatically stop rinsing after this..
• Then fill the appliance with clean water and repeat the procedure again, until
the smell of the descaling agent is completely gone.
PROBLEM
The device vibrates
and makes a
buzzing sound.
The ice cubes have
an irregular shape.
Water is leaking at
the bottom of the
unit.

8. DESCALING

9. FREQUENTLY ASKED QUESTIONS

SOLUTION
As the compressor kicks in, the unit will vibrate and buzz
slightly. This is normal.
The first few times this may be the case.
Ambient temperature also determines the size of the ice
cubes.
Make sure the drainage plug is securely in place.
WWW.PRIMO-ELEKTRO.BE
.
46
might stay on. In