Control Panel; Before First Use; Use - Primo Water PR407IB Manual

PR407IB
• Refill water
• Ice basket full
• Make ice cubes
• On/off button
• Cleaning button
• The indicator at the
appliance is now on standby. Use the ON/OFF button to turn the appliance on.
The indicator will then remain lit.
• If the red light stays on at the
tank. Fill the water tank with water and press the ON/OFF button to restart the
machine.
• If the light at
Empty the ice basket. When there is no more ice at the level of the sensor, the
machine will restart automatically.
• Before using for the first time, remove all packaging materials and any
promotional stickers.
• Before using the ice cube maker for the first time: wait 4 hours after you put
the unit in place and leave the lid open for at least 2 hours. This will allow the
refrigerant to settle.
• Place the ice cube maker on a flat and stable surface and make sure the vents
are not blocked.
• Clean the appliance before first use. See section: «cleaning and maintenance».
It is recommended to use spring water in this unit.
1. Place the ice cube maker on a flat and stable surface and make sure the vents
are not blocked.
2. Open the lid and remove the ice basket from the appliance so that you can
pour water into the water reservoir.

4. CONTROL PANEL

will start flashing when the plug is plugged in. The
there is not enough water left in the water
flashes, the ice basket is full. The machine will stop working.

5. BEFORE FIRST USE

6. USE

44
WWW.PRIMO-ELEKTRO.BE