Nokia 6225 User Manual page 47

To rename the calling card
1 Scroll to Card
Select.
2 Enter the card name, then press
OK.
Making calling cards calls
1 Enter the phone number,
including any prefix (such as 0
or 1) that your calling card may
require when you make a calling
card call. See your calling card
for instructions.
2 Press and hold
seconds until your phone
displays Card
3 Your phone displays
tone, then press
hear the tone or system
message, press OK.
4 Your phone displays
press OK after
hear the tone or system message,
press OK.
INTERNATIONAL PREFIX
Please enter the international access
code here. While dialling, enter the +
sign, and it will be replaced with the
access code specified here, when the
call is made.
Receive data/fax calls
Data or fax calls is a Network
Service. See "Network services" on
page 3 for more information.
name:, then press
for a few
call.
Wait for
OK. When you
Again,
tone. When you
Copyright © 2004 Nokia. All rights reserved.
If your wireless service provider
supports this feature, then you can
set up the phone to send or receive
data or fax calls when a terminal,
such as a PDA or PC, is connected.
For better performance during data
calls, place the phone on a
stationary surface with the keypad
facing downward. Do not move the
phone by holding it in your hand
during a data call.
Note: For more information
on connectivity, refer to the
PC/PDA Connectivity Guide.
The PC/PDA Connectivity
Guide can be downloaded
from the Nokia website
www.nokia-asia.com.
1 At the start screen, select
> Settings > Call settings
Data/fax calls
fax call > Normal,
only, or Fax calls only
Select:
Normal — The phone receives
incoming calls as usual.
Data calls only
receives only data calls.
Fax calls only
receives only fax calls.
2 When you are finished receiving
the fax or data call, repeat Step
1 and select Normal.
Settings (Menu 4)
Menu
>
> Incoming data/
Data calls
and press
— The phone
— The phone
43