Maintenance; Leak Test Bottle; Probe Tip - Sentry ST314A Instruction Manual

Maintenance

6.

Leak Test Bottle

6-1
Remember to close the seal cap of leak test bottle to
avoid evaporating completely after test.

Probe Tip

6-2
Replacement of the sensor or Tip Light LED (3V) is
shown in the following figure:
Assemble the sensor on the same side as the raised
point of the sensor seat.
Note: Turn off the detector before removing sensor.
The life of sensor is 1 year (normally use).
1.
Please mind there is no water drops, dusts in the
2.
surface of sensor.
14