Table of Contents
Advertisement
6. Maintenance
6-1 Leak Test Bottle
Remember to close the seal cap of leak test bottle to avoid evaporating completely
after test.
6-2 Probe Tip
Replacement of the sensor or Tip Light LED (3V) is shown in the following figure :
Note: Turn off the detector before removing sensor.
1. The life of sensor is 1 year (normally use), if the sensors 100 PPM refrigerant,
exposed to characteristic may be affected.
2. Please mind there is no water drops, dusts in the surface of sensor.
6-3. Clean
Clean the Housing:
Never use organic solvents to clean the meter. (Such as thinner, benzene, etc.)
Warning:
The organic solvents might damage the sensor, please avoid the solvents contacts the
sensor.
6-4. Replacement Parts
●Sensor
●DC 3.7 V rechargeable lithium battery
Advertisement
Table of Contents
