Usb Data Cable; Call - Nokia 6126 User Manual

Select Menu > Settings
Depending on the settings, select
Synchronizing for the first time or after an interrupted synchronization may take
up to 30 minutes to complete, if the contacts or calendar are full.

USB data cable

You can use the USB data cable to transfer data between the phone and a
compatible PC or a printer supporting PictBridge. You can also use the USB data
cable with Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the data cable;
when the phone displays
Select from the following modes:
Default mode — to use the cable for PC Suite
Printing — to print images directly from the phone using a compatible printer
To change the USB mode, select
cable > Default mode, Printing, or

■ Call

Select Menu > Settings
Call forwarding — to forward your incoming calls (network service). You may
not be able to forward your calls if some call restricting functions are active.
See Call restrictions
Anykey answer > On
the power key, the camera key, the left and right selection keys, or the end key
Automatic redial >
after an unsuccessful call attempt
1-touch dialing > On
1-touch-dialing keys 2 to 9 by pressing and holding the corresponding number key
Call waiting > Activate
while you have a call in progress (network service). See "Call waiting," p. 21.
Summary after call
(network service) of the call after each call
Send my caller ID > Yes
(network service). To use the setting agreed upon with your service provider,
select Set by network.
Line for outgoing calls
by your SIM card (network service).
> Connectivity
Initializing synchronization
USB data cable connected. Select
Menu
Data
> Call and from the following options:
in "Security," p. 48.
— to answer an incoming call by briefly pressing any key except
On — to make a maximum of 10 attempts to connect the call
— to dial the names and phone numbers assigned to the
— to have the network notify you of an incoming call
> On — to briefly display the approximate duration and cost
— to show your phone number to the person you are calling
— to select the phone line 1 or 2 for making calls if supported
> Data transfer > Server
> Settings > Connectivity
storage.
S e t t i n g s
synchronization.
or Initializing copy.
mode., select OK.
> USB data
45