Inter Water INTER HEAT SMART 26IS Installation Instructions Manual page 16

INTER HEAT SMART
26IS / 36IS
4
USE AND OPERATION INSTRUCTION
4.2.5 TIMER SETTING
In the main interface, press " " hold on 2 seconds and "on" is flashing, at this time, you can
set the timer on (means the unit timer is on) , then press " " again and hold on 2 seconds
and "off" is flashes you can set the timer off (means the unit timer is off) .
If you want cancel the timer off, In the "off" flashing interface, press " " to cancel
Attention: 1) If there is no operation for 5s, system will remember clock setting and back to the
main interface.
2) By pressing " till the "off" flashing, you can set the timer off without timer on.
16