iSNATCH HeyCam 67.6894.18 Manual

iSNATCH HeyCam 67.6894.18 Manual

Hd 720p ip wi-fi 2.4ghz motorized indoor camera compatible with amazon alexa and google home

Advertisement

HD 720P IP WI-FI 2.4GHZ MOTORIZED INDOOR CAMERA COMPATIBLE
WITH AMAZON ALEXA AND GOOGLE HOME - CODE 67.6894.18
WARNINGS
• Attention: the camera supports only 2.4GHz Wi-Fi connection. It does NOT support 5GHz band
• The camera is not waterproof, so it is not suitable for outdoor installations. It is an electronic device. It is
recommended to protect the camera and the power cable (the power plug does not have an IP protection
rating, so it must be 100% protected to avoid short circuits).
• The warranty will not cover damage due to water infiltration inside.
• In the event that the camera is in areas subject to significant changes in light / brightness, it will be necessary
to wait a few seconds for the image to return perfectly, the time necessary for the automatic recovery of the
light sensitivity. If the camera is oriented from a dark area towards highly luminous areas, the shooting of
those areas may appear very blurry and white, but also with a green color tone. It is not a defect but a
peculiarity of the built-in IR LEDs that will tend to activate as the twilight sensor inside the camera will start
working. It will therefore be necessary to orient the camera in another way. Also bear in mind that the camera
in the dark will shoot in black/white.
• If you have not used the system for a long time, disconnect the camera power supply.
• Do not cut the power supply cord of the unit to adapt it to another power source.
• Check that the power supply and the cable coming out of it are not damaged; otherwise, disconnect the
power supply and contact your dealer for replacement with an equivalent model.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HeyCam 67.6894.18 and is the answer not in the manual?

Questions and answers

Summary of Contents for iSNATCH HeyCam 67.6894.18

  • Page 1 HD 720P IP WI-FI 2.4GHZ MOTORIZED INDOOR CAMERA COMPATIBLE WITH AMAZON ALEXA AND GOOGLE HOME - CODE 67.6894.18 WARNINGS • Attention: the camera supports only 2.4GHz Wi-Fi connection. It does NOT support 5GHz band • The camera is not waterproof, so it is not suitable for outdoor installations. It is an electronic device. It is recommended to protect the camera and the power cable (the power plug does not have an IP protection rating, so it must be 100% protected to avoid short circuits).
  • Page 2: Microsd Card

    DESCRIPTION MICRO SD CARD To make the recordings, please put the micro SD card (max. 64GB) into the camera when it is in off. After adding the camera to the mobile app, please access to the settings to reset the SD and set the recording mode (24h or in case of motion alarm).
  • Page 3 Note 1: The QR code must be placed in front of the camera at a distance of 15-20 cm. The camera will issue a confirmation beep once connection has been made. Note 2: Cloud Storage is not free.
  • Page 4 PUSH ON MOTION ALARM In the camera settings is possible to enable the motion detection. When the camera triggers, you will receive a push notification. In addition, on the app, you can view all notifications with related snapshots . SD MEMORY CARD SETTINGS AND RECORDING ACCESS By accessing the camera settings, you can check the capacity of the inserted micro SD card, recording mode (continuous or on motion event), format it.
  • Page 5: Reset Factory Settings

    RESET FACTORY SETTINGS To reset to factory settings, you must delete the camera from the app by accessing the settings camera. When it restarts, the camera will again issue the "ding ding ding" awaiting association ASSOCIATION WITH AMAZON ALEXA Access the skills from the alexa app, search Smart Life and connect your account. Once the connection is established, ask Alexa to search all devices to add them.
  • Page 6 ASSOCIATION WITH GOOGLE HOME Make the Log in to the Google Home app, search Smart Life and connect your account. Once learned, you can ask: "Alexa, show me <Camera Name>", "Hey Google, show me <Camera Name>" Important: The camera display requires monitor supports (eg Amazon Echo spot or smart TV using Google Chromecast).
  • Page 7 PC CONNECTION: FIND A NETWORK CAMERA WITH WISEETOOL.EXE The camera has the DHCP function active, this means that it has no IP address. By connecting the camera to the router via Ethernet cable or Wi-Fi (via App), it will receive a free IP address from the router, without creating conflicts with other devices on the network.
  • Page 8: Advanced Parameters

    KON.EL.CO. S.p.A. Company (P.za Don Mapelli, 75, 20099 Sesto San Giovanni, MI) as manufacturer, declares under its own responsibility that the product Brand ISNATCH Type: IP WI-FI INDOOR PAN TILT CAMERA Mod. HEY CAM Cod. 67.6894.18, is operative with Working Frequency 2.412-2.472MHz; Max E.I.R.P. POWER: 15,24dBm;...
  • Page 9 The product at the end of its life must be disposed of separately at the collection centers, or returned to the retailer at the time of purchase of an equivalent device or free if smaller than 25cm. Improper disposal will have negative effects on the environment and on human health.

Table of Contents