A USB cable that supports data transfer must be used. ■ Mac In the Audio MIDI Setup app on the Mac, select the ZOOM UAC-232 in the Audio Devices window, and set the input and output formats to 32-bit float.
Connecting instruments Guitar Bass When directly connecting a guitar or bass, press that it lights. Connecting mics Dynamic mic Condenser mic 1: GND 2: HOT 3: COLD When connecting a condenser mic, press so it lights.
When using a MIDI port with a DAW, for example, follow the instructions below when making settings. The UAC-232 or ZOOM UAC-232 Mix Control might not function properly otherwise. Use ZOOM UAC-232 MIDI I/O Port. Do not use for ZOOM UAC-232 Mix Control. Windows...
Page 5
The dedicated ZOOM UAC-232 Mix Control app, which supports Windows/Mac computers and iOS/iPadOS devices, can be used to control the internal mixer of the UAC-232 and adjust the stereo mix for direct monitoring and streaming. Download it from the ZOOM website (zoomcorp.com) or the App Store.
Page 6
Recording Launch the DAW app and create a project New project with 32-bit float resolution. 32-bit float Input: Select the ZOOM UAC-232 as the ZOOM UAC-232 Output: input device. ZOOM UAC-232 ● Record Recording Refer to the DAW app manual for details about how to use it.
These light when signals are being input. ⑩ 32-BIT FLOAT indicator This lights when the UAC-232 is operating at 32-bit float resolution. ■ Back ① DC 5V port (Type-C) ③ MIDI IN/OUT connectors...
→ Confirm that “ZOOM UAC-232” is selected in the → Confirm that the USB cable is connected to “Sound” settings of the computer being used. → Confirm that UAC-232 is set for input and output in the UAC-232, not to the software being used.
Need help?
Do you have a question about the UAC-232 and is the answer not in the manual?
Questions and answers