Nokia 5190 Owner's Manual page 24

5 At Dialing sequence, press Select. Press
the dialing sequence your card uses, then press Select.
Dialing
sequence
Access number
+ phone
number
+ card number
Access number
+ card number
+ phone
number
Prefix
+ phone
number
+ card number
Note: The order of the following steps may vary, depending
on which dialing sequence your card uses.
6 Enter access number (usually the 1-800 number listed
on the back of the calling card), then press OK.
7 Enter your card number and/or PIN, then press OK. Your
phone will display Save changes? Press OK.
8 Press
the card name using your phone's keypad, then press OK.
Note: This procedure might not work with all calling cards.
Please look at the back of your calling card or contact your
long distance company for more information.
Use for cards that
require you to:
Dial 1-800 access
number, then phone
number, then card
number (+ PIN if
required)
Dial 1-800 access
number, then card
number (+ PIN if
required), then phone
number
Dial the prefix (any
numbers that must
precede the phone
number) and phone
number you want to dial,
then card number (+ PIN
if required)
to reach Card name, then press Select. Enter
17
to choose
Cards using
this sequence
MCI, AT&T
True Choice,
Sprint
Canada,
Unitel
networkMCI,
WorldPhone
MCI
GTE, PacBell,
AT&T, Stentor