Advertisement
Resetting your Atlantik V4 to Factory Default
Under unusual circumstances you may have to reset your Atlantik V4 to factory
default.
This usually happens when you cannot connect to your light.
Resetting your light is a very simple process.
1. Remove power from your gateway.
2. Rapidly plug the power supply in and out of the power receptacle four times. Your
light should flash twice and remain on at 80% intensity.
Advertisement
Table of Contents
Related Manuals for Orphek Atlantik V4
Summary of Contents for Orphek Atlantik V4
- Page 1 Resetting your Atlantik V4 to Factory Default Under unusual circumstances you may have to reset your Atlantik V4 to factory default. This usually happens when you cannot connect to your light. Resetting your light is a very simple process. 1. Remove power from your gateway.
- Page 2 Resetting your Atlantik V4 to Factory Default 3. Apply power to your gateway and wait at least 3 minutes for all processes to complete.
- Page 3 Resetting your Atlantik V4 to Factory Default 4. Enter your gateway ID into the Orphek app and press search. The gateway ID is found on the back of your gateway. Only use the numbers beginning with 888. 5. A visual aid can be viewed here.
Need help?
Do you have a question about the Atlantik V4 and is the answer not in the manual?
Questions and answers