Page 1
Installation & User Guide CAUTION Please read instructions carefully to ensure safe installation and operation. Please retain this user guide for future reference. v1.0 (09/2022)
WARRANTY This product is covered by a 2-year warranty. The warranty is from the date of purchase, not the date of installation. If this product is not assembled and installed by a licensed electrician, the warranty will be void. Please retain proof of purchase and evidence of installation by a licensed electrician for any warranty enquiries.
INSTALLATION CONDITIONS This product must be installed by a licensed electrician. All wiring and installation of this product must adhere to the latest local and national wiring rules. e.g. AS/NZS 3000 Electrical Installations. WARNING: FOR SAFE USE OF THIS APPLIANCE AN ALL-POLE DISCONNECTION SWITCH MUST BE INCORPORATED INTO THE FIXED WIRING IN ACCORDANCE WITH THE WIRING RULES.
SAFETY AND USE Always ensure power to the circuit you are working on has been switched off before commencing any electrical work or maintenance. This appliance is not to be used by persons, including children, with reduced physical, mental or sensory capabilities, or lack of knowledge and understanding, unless they are supervised and or given instruction concerning the use of the appliance by someone responsible for their safety.
PRE-INSTALLATION Take care not to pull any electrical wires during unpacking as this may damage the connection. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within the packaging material. Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
INSTALLATION Remove the mounting bracket from the product and use the mounting bracket as a template to mark the screw hole positions on the ceiling. Install the mounting bracket onto the ceiling by using appropriately sized mounting screws and anchors. Ensure the screws and anchors used are suitable for the mounting surface and the surrounding environment.
Page 7
INSTALLATION Connect the quick connector from the mounting bracket and the product together. Install the product onto the mounting bracket by aligning the labels together and twist clockwise. Secure the product onto the mounting bracket by securing the screws on the sides Install the GX53 lamp into the lamp holder.
Page 8
USER GUIDE Turn the air purifier OFF, including the time functions Air purifier will operate at speed 1 (lowest speed). SLEEP The indicator light and GX53 lamp light will be turned off. The air purifier will turn off after 8 hours.
Page 9
USER GUIDE LIGHT Press button to turn GX53 lamp ON or OFF. Press the button again within 3 seconds to switch/cycle the status. First switch: 350 lumens at 2700K (Sleep – Recommended setting at least 2 hours before bed) Second switch: 1700 lumens at 2700K (Night –...
Page 10
USER GUIDE Sanso is provided with a HEPA 13 filter which has a suggested use time of 3000 hours, based on standard residential operating conditions. After 3000 hours, the indicator light will blink red until the filter is changed and/or the indicator is reset. Take note of the marker position Take note of the...
CARE AND MAINTENANCE Always turn OFF the power at the mains switch before performing any maintenance or attempting to clean your appliance. Clean the inlet & outlet of the appliance regularly. Wipe with a soft damp clean cloth only. DO NOT use any organic/corrosive chemical/solvents or abrasive cleaners etc.
Page 12
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the ground water and get into the food chain, damaging your health and well-being.
Need help?
Do you have a question about the SANSO 089200 and is the answer not in the manual?
Questions and answers